26
ENGLISH
Assigning names to CDs
You can assign names to CDs. After assigning a
name, it will appear on the display when you
select the CD player or CD changer.
Maximum number of the characters:
Up to 32 characters (up to 40 discs)
4
Move the cursor to the next (or
previous) character position.
5
Repeat steps 3 and 4 until you finish
inputting the name.
6
Press the button while the last
selected character is flashing.
The input name is stored in memory.
To erase the input characters
Insert spaces using the same procedure
described above.
Available characters
Note:
You cannot assign a name to a CD Text.
1
Select a source you want to assign a
name to.
2
Press and hold SEL (select) for
more than 2 seconds while pressing
DISP.
3
Select a character.
About the available characters, see the right
column.
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
space
0 1 2 3
4 5 6 7 8 9
–
/
<
>
Notes:
• When you try to assign a name to the 41st disc,
“NAME FULL” appears on the display. (In this
case, delete unwanted names before assignment.)
• When the CD changer is connected, you can assign
names to CDs in the CD changer. These names can
also be shown on the display if you insert the CDs
in this unit.
EN22-28.KD-LX110R[E]f 2/6/01, 2:35 PM26
To Next Page
Loading...
Need help?
General
