JVC KD-LX110R User Manual

34
ENGLISH
4 Select a service you want to listen to.
1 Press MODE BAND.
“MODE” appears on the
display.
2 Press ¢ or 4
to select a service you
want, while “MODE” is
still on the display.
To change the display information while
tuning into an ensemble
Normally service name is shown on the display.
If you want to check the ensemble name or its
frequency, press DISP (display).
Each time you press the button, the following
information appears for a while on the display.
To tune in a particular ensemble without
searching:
1 Press SOURCE to select DAB tuner as the
source.
2 Press MODE BAND repeatedly to select the
DAB band (DAB1, DAB2, or DAB3).
3 Press and hold ¢ or 4 for more
than 1 second.
4 Press ¢ or 4 repeatedly until the
ensemble you want is reached.
• If you hold down the button, the ensemble
keeps changing until you release the button.
Storing DAB services in
memory
You can preset up to 6 DAB services in each DAB
band (DAB1, DAB2 and DAB3) manually.
1 Select the DAB tuner (DAB1–3).
1 Press SOURCE to select
DAB tuner as the source.
2 If necessary, press and
hold MODE BAND
repeatedly to select the
DAB band number
(DAB1, DAB2 or DAB3).
Each time you press and hold the button, the
DAB band changes as follows:
2 Tune into an ensemble you want.
3 Select a service of the ensemble you
want.
1 Press MODE BAND.
“MODE” appears on the
display.
2 Press ¢ or 4
to select a service you
want, while “MODE” is
still on the display.
DAB1 DAB2 DAB3
Ensemble name
Service name
Channel number
Frequency
BAND
BAND
BAND
EN32-39.KD-LX110R[E]f 2/6/01, 2:33 PM34

JVC KD-LX110R Specifications

General

Brand	JVC
Model	KD-LX110R
Category	Car Receiver
Language	English