15ENGLISH
Menu operations
1
If no operation is done
for about 60 seconds, the
operation will be canceled.
2 3
Repeat step 2 if necessary.
• To return to the previous
menu, press T/P BACK.
• To exit from the menu, press
MENU.
[Hold]
Continued...
Menu item
Selectable setting, [Initial: Underlined]
DEMO
For settings, see page 4.
CLOCK
CLOCK SET
For settings, see page 4.
24H/12H
For settings, see page 4.
CLOCK ADJ *
1
AUTO
:
The built-in clock is automatically adjusted using the CT (clock time) data in the
Radio Data System signal. /
OFF
: Cancels.
COLOR
BUTTON ZONE
29 preset colors /
USER
/
COLORFLOW
01/02/03
: Selects your preferred color
for buttons illumination (except for
DISP
/
BRIGHTNESS
/
0
) and display color
separately.
• If <ALL ZONE> is selected, the button and display illumination will change to the
current/selected <BUTTON ZONE> color.
• Initial color :
BUTTON ZONE
[
06
],
DISP
ZONE
[
01
],
ALL
ZONE
[
06
]
DISP ZONE
ALL ZONE
COLOR SETUP
DAY COLOR BUTTON ZONE
You can create your own day and night colors for
<BUTTON ZONE> and <DISP ZONE> separately.
Perform step
2
to select a primary color (
RED
/
GREEN
/
BLUE
), then adjust the level [
00
—
31
]. Repeat this procedure
until you have adjusted all the three primary colors.
• If “
00
” is selected for all the primary colors for <DISP ZONE>,
nothing appear on the display.
DISP ZONE
NIGHT COLOR BUTTON ZONE
DISP ZONE
MENU COLOR
ON
:
Changes the display and buttons (except for
DISP
/
BRIGHTNESS
/
0
)
illumination during menu, list search and playback mode operations. /
OFF
:
Cancels.
*
1
Takes effect only when CT (clock time) data is received.
All zone
Display zone
Button zone
EN02-21_KD-R621[E]f.indd 15EN02-21_KD-R621[E]f.indd 15 11/15/10 4:20:40 PM11/15/10 4:20:40 PM