ENGLISH
4
Basic operations
Using the control panel
p • FM/AM: Search for station.
• CD/USB/USB-IPOD/CD-CH: Select track.
• IPOD: Select category/track.
• BT-PHONE/BT-AUDIO: Select setting item/
registered device.
q • Return to the previous menu.
• USB-IPOD: Switch the setting between “HEAD
MODE” and “IPOD MODE” *
6
[Hold].
w Select the display and button illumination color.
e • Turn on the power.
• Attenuate the sound (if the power is on).
• Turn off the power [Hold].
r Remote sensor
t AUX (auxiliary) input jack
*
1
Also known as “Control dial” in this manual.
*
2
You cannot select these sources if they were disabled
in the Menu (see “ SRC SELECT” in “Menu
operations” on page 25).
*
3
You cannot select these sources if they are not ready
or not connected.
*
4
When connecting the iPod/iPhone to the USB input
jack for the first time, “USB” appears on the display
first, then “USB-IPOD.”
*
5
You can still adjust the volume during pause when
the selected source is CD/USB/USB-IPOD.
Before resume playback, check to be sure that you
have not raise the volume level too much.
*
6
You can use this function only when “IPOD
MODE” is available for the connected iPod (see
page 30).
1 • FM/AM: Select preset station.
• CD/USB/CD-CH: Select folder.
• IPOD: Enter the main menu/Pause playback/
Confirm selection.
• BT-PHONE/BT-AUDIO: Enter/go back to
previous Bluetooth menu.
2 Select the source.
FM = AM *
2
= CD *
3
= USB/USB-IPOD *
3,
*
4
= CD-CH *
3
/IPOD *
3
(or EXT INPUT) =
BT-PHONE *
3
= BT-AUDIO *
3
= AUX IN *
2
=
(back to the beginning)
3 • Enter list operations.
• Enter Menu setting [Hold] .
• USB-IPOD: Enter the main menu.
4 • Control the volume *
5
or select items [Turn].
• Confirm the selection [Press].
• FM: Enter SSM preset mode [Hold].
• CD/USB/USB-IPOD: Pause/resume playback *
5
[Press].
• CD/USB/USB-IPOD/CD-CH/IPOD: Enter
playback mode [Hold].
5 Display window
6 USB (Universal Serial Bus) input jack
7 Select the sound mode.
8 Change the display information.
9 Flip down the control panel.
• To eject the disc, flip down the control panel
then press 0 on the unit.
EN02-11_KD-R705_001A_2.indd 4EN02-11_KD-R705_001A_2.indd 4 19/12/08 2:43:48 PM19/12/08 2:43:48 PM