20
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
KD-R971BT KD-R771BT
1 Press and hold .
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press .
Default:
XX
DISPLAY
DIMMER
Dim the display and buttons illumination.
OFF
:Dimmer is turned off.
ON
:Dimmer is turned on. Brightness changes to [
NIGHT
] setting.
(
[
BRIGHTNESS
]
)
DIMMER TIME
:Set the dimmer on and off time.
1
Turn the volume knob to adjust the [
ON
] time, then press the knob.
2
Turn the volume knob to adjust the [
OFF
] time, then press the knob.
(Default: [
ON
]: 18:00 or 6:00 PM
[
OFF
]: 6:00 or 6:00 AM)
AUTO
:Dimmer turns on and off automatically when you turn off or on the car
headlights. *
1
DISPLAY SETTINGS
BRIGHTNESS
Set the button and display brightness for day and night separately.
1
DAY
/
NIGHT
:Select day or night.
2
Select a zone.
3
Set the brightness level (
00
to
31
). (Default:
DAY
:
31
;
NIGHT
:
15
)
SCROLL
*
2
ONCE
:Scrolls the display information once.;
AUTO
:Repeats scrolling at
5-second intervals.;
OFF
:Cancels.
COLOR
(for
KD-R971BT
)
PRESET
Select color for display and button illumination separately.
Default color:
ALLZONE
: [
COLOR08
],
DISPZONE
: [
COLOR01
],
ZONE 1
: [
COLOR08
],
ZONE 2
: [
COLOR46
]
1
Select a zone.
2
Select a color for the selected zone.
•
COLOR01
to
COLOR49
•
USER
: The color you have created for [
DAYCOLOR
] or
[
NIGHTCOLOR
] is shown.
•
COLORFLOW01
to
COLORFLOW03
: Color changes at different
speeds.
•
GROOVE
/
TECHNO
/
EMOTION
/
RELAX
/
SPECTRUM
/
SWEEP
/
POP
: The selected color pattern is shown.*
3
(Selectable only when
[
ALLZONE
] is selected in step
1
.)
*
1
The illumination control wire connection is required.
( 29)
*
2
Some characters or symbols will not be shown correctly (or will be blanked).
*
3
If one of these color pattern is selected, the [
ZONE1
], [
DISPZONE
], [
ZONE2
] illumination
color will change to the default color.
JS_JVC_KD_R971BT_M_EN_3.indd 20JS_JVC_KD_R971BT_M_EN_3.indd 20 23/9/2015 2:31:18 PM23/9/2015 2:31:18 PM
To Next Page
Loading...
Need help?
General
