21ENGLISH
Continued...
Listening to the other external components
Connecting an external component to the AUX input jack
3.5 mm stereo mini plug
(not supplied)
Portable audio player,
etc.
Recommended to use a 3-terminal plug head
stereo mini plug for optimum audio output.
You can connect an external component to the AUX (auxiliary) input jack on the control panel.
Preparation:
Make sure <Show> is selected for the <Source Select>
=
<Aux Source> setting. (page 25)
• For details, refer also to the instructions supplied with the external components.
~
]
“AUX IN”
!
]
Adjust the volume.
Ÿ
Turn on the connected component
and start playing the source.
⁄
Adjust the sound as you want.
(page 21, 22)
You can select a preset sound mode suitable
for the music genre.
FLAT
=
NATURAL
=
DYNAMIC
=
VOCAL
=
BASS
=
USER
=
(back to the beginning)
While listening, you can adjust the subwoofer
level and tone level of the selected sound
mode.
1
2
]
Select a setting item (Sub. W/ Bass/
Middle/ Treble).
3
]
Adjust the level:
Sub. W : 00 to 08
Bass/ Middle/ Treble : –6 to +6
The sound mode is automatically stored
and changed to “USER.”
[Hold]
Selecting a preset sound mode
EN02-29_KD-R821BT_003A_f.indd 21EN02-29_KD-R821BT_003A_f.indd 21 1/26/11 3:00:19 PM1/26/11 3:00:19 PM
To Next Page
Loading...
Need help?
General
