22 ENGLISH
Storing your own sound mode
You can store your own adjustments in
memory.
1
2
]
<PRO EQ>
]
<Bass/ Middle/ Treble>
3
Adjust the sound elements of the
selected tone. (See table on the right
column.)
1
Press
4
/
¢
to adjust the
frequency.
2
Turn the control dial to adjust the
level.
3
Press
5
/
∞
to adjust the Q-slope.
4
Press the control dial to store the
adjustment.
4
Repeat steps 2 and 3 to adjust other
tones.
5
]
Exit from the menu.
The adjustments made will be stored
and changed to “USER.”
Bass [
Initial: 50 Hz, 0, Q1.0
]
Frequency: 50 Hz, 100 Hz, 200 Hz
Level: –6 to +6
Q: Q0.7, Q1.0, Q1.4, Q2.0
Middle [
Initial: 1 kHz, 0, Q1.0
]
Frequency: 500 Hz, 1 kHz, 2 kHz
Level: –6 to +6
Q: Q0.7, Q1.0, Q1.4, Q2.0
Treble [
Initial: 10 kHz, 0, Q1.0
]
Frequency: 5 kHz, 10 kHz, 15 kHz
Level: –6 to +6
Q: Q0.7, Q1.0, Q1.4, Q2.0
[Hold]
Menu operations
1
If no operation is done
for about 60 seconds, the
operation will be canceled.
2 3
Repeat step 2 if necessary.
• To return to the previous
menu, press T/P BACK.
• To exit from the menu, press
MENU.
[Hold]
Menu item
Selectable setting, [
Initial: Underlined
]
DEMO On
:
Display demonstration will be activated automatically if no operation is done for
about 20
seconds. /
Off
:
Cancels. (page 4)
Clock
Set Clock
For settings, see page 4.
24H / 12H
For settings, see page 4.
Clock Adjust *
1
Auto
:
The built-in clock is automatically adjusted using the CT (clock time) data in the
Radio Data System signal. /
Off
: Cancels.
*
1
Takes effect only when CT (clock time) data is received.
EN02-29_KD-R821BT_003A_2.indd 22EN02-29_KD-R821BT_003A_2.indd 22 1/13/11 5:17:19 PM1/13/11 5:17:19 PM
To Next Page
Loading...
Need help?
General
