11
ENGLISH |
SiriusXM® Radio
(for
KD-AR959BS
/
KD-R85MBS
)
Preparation:
1 Connect the optional SiriusXM Vehicle Tuner (commercially
available).
2 Activate the subscription through www.siriusxm.com/activatenow
or call 1-866-635-2349.
The Radio ID is required to activate the SiriusXM Vehicle Tuner.
The Radio ID is located on the label of the SiriusXM Vehicle Tuner
and can also be shown on the unit’s display window when you select
“Channel 0” after SiriusXM Vehicle Tuner is connected.
For users in Canada: To activate SiriusXM Canada service go to
www.xmradio.ca and click on “ACTIVATE RADIO” in the top right
corner, or call 1-877-438-9677.
3 Press B /SOURCE to select SIRIUSXM to start updating.
Start listening
1
Press B /SOURCE to select SIRIUSXM.
2 Press MENU.
3 Turn the volume knob to select a CATEGORY, then press the knob.
4 Turn the volume knob to select a category from the list, then press
the knob.
If “ALL CHANNELS” is selected, all the available channels will be
shown.
5 Turn the volume knob to select a channel, then press the knob.
(or)
Press S/ T to search for a channel manually.
• Pressing and holding S/ T changes the channel rapidly.
If a locked channel or a mature channel (
[MATURE CH]
is set to
[ON]
) is
selected, a pass code input screen appears. Enter the pass code to receive
the channel.
Antenna
SiriusXM Vehicle TunerExpansion port on
the rear panel
Store a channel
You can store up to 18 channels.
Press and hold one of the number buttons (1 to 6).
(or)
1 Press and hold the volume knob until “PRESETMODE” flashes.
2 Turn the volume knob to select a preset number, then press the
knob.
The preset number flashes and “MEMORY” appears.
To select a stored channel:
Press one of the number buttons (1 to 6).
(or)
1 Press MENU.
2 Turn the volume knob to select PRESET, then press the knob.
3 Turn the volume knob to select a preset number, then press the
knob.
(or)
Press J / K on RM-RK52.
SiriusXM Replay™
1
Press the volume knob.
“
” lights up and the unit memorizes this paused position.
2 Press the volume knob to start Replay.
Replay starts from the paused position in step
1.
During Replay...
• To pause or resume playback, press the volume knob.
• To skip the current song backward/forward, press S/ T (or press
H / I on RM-RK52).
• To rewind/fast-forward, press and hold S/ T (or press and hold
H / I on RM-RK52).
• To exit from Replay and go to live, press and hold the volume knob.
To Next Page
Loading...
Need help?
General
