To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...What to do if JVC Car Receiver says “CANNOT PLAY”?
If your JVC Car Receiver displays “CANNOT PLAY”, make sure your Android device contains playable audio files. Reconnect the Android device, or restart the Android device.
What to do if JVC Car Receiver says “BT DEVICE NOT FOUND”?
If your JVC Car Receiver displays “BT DEVICE NOT FOUND”, turn on Bluetooth from your device and connect manually.
Why is playback intermittent on my JVC Car Receiver?
If you're experiencing intermittent playback or sound skipping with your JVC Car Receiver, try turning off the power saving mode on your Android device.
How to fix pairing issues on JVC KD-R980BTS?
If you are unable to make a pairing with your JVC Car Receiver, verify that you have entered the same PIN code on both the unit and the Bluetooth device. If the problem continues, delete the pairing information from both the unit and the Bluetooth device, and then try pairing again.
How to fix no sound during playback on JVC KD-R980BTS?
If you cannot hear sound during playback on your JVC Car Receiver, try the following: * Reconnect the Android device. * If in [AUDIO MODE], launch any media player application on the Android device and start playback. * If in [AUDIO MODE], relaunch the current media player application or use another media player application. * Restart the Android device. If the problem persists, the connected Android device may not be able to route the audio signal to the unit.
What to do if JVC Car Receiver detects no Bluetooth device?
To resolve the issue of no Bluetooth device being detected by your JVC Car Receiver, search from the Bluetooth device again or reset the unit.
What does “NOT SUPPORT” mean on JVC KD-R980BTS?
If the JVC Car Receiver displays “NOT SUPPORT”, it means that the connected phone does not support the Voice Recognition feature.
Why can't I playback in AUTO MODE on JVC KD-R980BTS Car Receiver?
If you are unable to playback in [AUTO MODE] on your JVC Car Receiver, ensure that the JVC MUSIC PLAY APP is installed on the Android device. Reconnect the Android device and select the appropriate control mode. If the problem persists, the connected Android device may not support [AUTO MODE].
Why can’t I control Bluetooth player on JVC KD-R980BTS?
If the connected Bluetooth audio player cannot be controlled with your JVC Car Receiver, check whether the connected Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP). If not, disconnect and connect the Bluetooth player again.
What to do if JVC Car Receiver says “PLEASE WAIT”?
If your JVC Car Receiver shows “PLEASE WAIT” and the message does not disappear, turn the unit off and then on, and connect the device again.
General| Brand | JVC |
|---|---|
| Model | KD-R980BTS |
| Category | Car Receiver |
| DIN Size | Single DIN |
| RMS Power Bandwidth | 20 Hz - 20 kHz |
| Bluetooth | Yes |
| USB Port | Yes |
| USB Input | Yes |
| AUX Input | Yes |
| CD Player | Yes |
| Radio Tuner | AM/FM |
| Preamp Outputs | 3 (Front, Rear, Subwoofer) |
| Preamp Voltage | 4 Volts |
| Display Type | LCD |
| SIRI Compatibility | Yes |
| Android Compatibility | Yes |
| Pandora Control | Yes |
| Spotify Control | Yes |
| iHeartRadio Control | Yes |
| HD Radio | No |
| Remote Control | Yes |
| Built-in Microphone | Yes |
| Steering Wheel Control | Yes |
| EQ Settings | 13-Band Graphic EQ |
| Faceplate Security | Detachable |
| RMS Power Output | 22W x 4 |
| Peak Output | 50 watts x 4 channels |
| Compatible Formats | MP3, WMA, WAV |
| Power Output | 50W x 4 |
| Display | Variable Color |
Important safety warnings and adherence to FCC regulations for RF energy.
Guide to connecting and playing audio from various media sources.
Steps for setting up and enjoying Pandora internet radio via the unit.
Instructions for pairing and establishing Bluetooth connections with devices.
Lists common issues and their corresponding solutions for unit operation.
Step-by-step instructions for physically installing the unit and connecting its wiring.
