ENGLISH
16
To On the faceplate On the remote control
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
Press
or the volume
knob.
( Not available )
Reject another incoming
call
Press and hold
or
the volume knob.
( Not available )
While having two active calls...
End current call and
activate held call
Press and hold
or
the volume knob.
Press and hold
.
Swap between the
current call and held call
Press
.
( Not available )
Adjust the phone volume
*
1
[00]
to
[35]
(Default:
[15]
)
Turn the volume knob
during a call.
( Not available )
Switch between hands-free
and private talk modes
*
2
Press during a call.
( Not available )
*
1
This adjustment will not affect the volume of the other sources.
*
2
Operations may vary according to the connected Bluetooth device.
Improve the voice quality
While talking on the phone....
1 Press and hold .
2 Turn the volume knob to select an item
(
see the following table
)
, then press
the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press
.
Default:
XX
MIC GAIN LEVEL –10
to
LEVEL +10
(
LEVEL –04
):The sensitivity of the
microphone increases as the number increased.
NR LEVEL LEVEL –05
to
LEVEL +05
(
LEVEL 00
):Adjust the noise
reduction level until the least noise is being heard during a
phone conversation.
ECHO CANCEL LEVEL –05
to
LEVEL +05
(
LEVEL 00
):Adjust the echo
cancellation delay time until the least echo is being heard
during a phone conversation.
Make the settings for receiving a call
1
Press to enter Bluetooth mode.
2 Turn the volume knob to select an item (see the following
table), then press the knob.
3
Repeat step
2
until the desired item is selected or activated.
To return to the previous setting item, press .
Default:
XX
SETTINGS
AUTO ANSWER
01 SEC
to
30 SEC
:The unit answers incoming call
automatically in the selected time (in seconds).;
OFF
:Cancels.
RING COLOR KD-R985BTS
/
KD-RD98BTS:
COLOR
01
to
COLOR
49
(
COLOR 08
): Selects the light color
for the buttons as notification when there is an incoming call
and during a call.;
OFF
:Cancels.
RING ILLUMI KD-R885BTS
/
KD-R780BT/KD-RD88BT:
BLINK 1
to
BLINK 5
(
BLINK 2
): Selects the blinking pattern
for the buttons as notification when there is an incoming call.;
OFF
:Cancels.
BLUETOOTH®
JS_JVC_KD_R985BTS_K_EN_5.indd 16 8/8/2016 9:31:39 PM
To Next Page
Loading...
Need help?
General
