JVC KD-R985BTS User Manual

ENGLISH
28
TEXT SCROLL *
2
SCROLL ONCE :Scrolls the display information once.; SCROLL AUTO :Repeats scrolling at
5-second intervals.;
SCROLL OFF :Cancels.
COLOR (for KD-R985BTS/KD-RD98BTS )
PRESET Select illumination colors for button and display separately.
Default color:
ALL ZONE : [COLOR 08] , DISP ZONE : [COLOR 01] , ZONE 1 : [COLOR 08] ,
ZONE 2 : [COLOR 46]
1 Select a zone. ( 27)
2 Select a color for the selected zone.
•
COLOR 01 to COLOR 49
• USER : The color you have created for [DAY COLOR] or [NIGHT COLOR] is shown.
•
COLOR FLOW01 to COLOR FLOW03 : Color changes at different speeds.
•
GROOVE / TECHNO / EMOTION / RELAX / SPECTRUM / SWEEP / POP : The selected
color pattern is shown.*
3
(Selectable only when [ALL ZONE] is selected in step 1 .)
DAY COLOR Store your own day and night illumination colors for different zones.
Default color:
ZONE 1 : [RED 00] , [GREEN 05] , [BLUE 31]
DISP ZONE
: [RED 20] , [GREEN 31] , [BLUE 31]
ZONE 2
: [RED 00] , [GREEN 31] , [BLUE 00]
1 Select a zone. ( 27)
2 RED / GREEN / BLUE :Select a primary color.
3 00 to 31 :Select the level.
Repeat steps
2 and 3 for all the primary colors.
• Your setting is stored to
[USER] in [PRESET] .
• If
[00] is selected for all primary colors for [DISP ZONE] , nothing appears on the
display.
•
[NIGHT COLOR] or [DAY COLOR] is changed by turning on or off your car’s headlight.
NIGHT COLOR
COLOR GUIDE
ON :Changes the button illumination and display illumination when settings are
performed on menu and list search. Display zone will automatically change depending on
volume level.;
OFF :Cancels.
*
2
Some characters or symbols will not be shown correctly (or will be blanked).
*
3
If one of these color pattern is selected, the [ZONE 1] , [DISP ZONE] , [ZONE 2] illumination color will
change to the default color.
DISPLAY SETTINGS REFERENCES
Maintenance
Cleaning the unit
Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Cleaning the connector
Detach the faceplate and clean the
connector gently with a cotton swab,
being careful not to damage the
connector.
Handling discs:
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
• Do not use any accessories for the disc.
• Clean from the center of the disc and move outward.
• Clean the disc with a dry silicone or soft cloth. Do not use any solvents.
• When removing discs from this unit, pull them out horizontally.
• Remove burrs from the center hole and disc edge before inserting a disc.
More information
For: – Latest firmware updates and latest compatible item list
– JVC original application
– Any other latest information
Visit <http://www.jvc.net/cs/car/>.
General
• This unit can only play the following CDs:
• DualDisc playback: The Non-DVD side of a “DualDisc” does not comply with
the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side
of a DualDisc on this product cannot be recommended.
• For detailed information and notes about the playable audio files, visit
<http://www.jvc.net/cs/car/>.
Connector (on the reverse
side of the faceplate)
JS_JVC_KD_R985BTS_K_EN_5.indd 28 8/8/2016 9:31:41 PM

JVC KD-R985BTS Specifications

General

Brand	JVC
Model	KD-R985BTS
Category	Car Receiver
Language	English