JVC KD-S100 User Manual

• To adjust bass and treble-BasslTre
IT] Select "Bass" or "Treble."
\"~'.;\
/&:1~jfil
• To adjust subwoofer output-
S.woofer
IT] Adjust the output level.
• To adjust the input level of each
source-Vol Adj
This setting is required for each source except for FM.
Once an adjustment is made, it will be memorized.
When you change the source, the volume level will
automatically increase or decrease according to the
adjusted level.
IT] Select a source before entering the SEL menu.
rn Adjust to match the input level to the FM sound
level.
[Turn] -5 ~ +5
lTurnlU+
General settings - PSM
rn Select a cut-off frequency according to the
connected subwoofer.
You can change PSM (Preferred Setting Mode) items
(except "Sirius 10") listed in the table that follows.
~ [Turn]
3 Select or adjust the selected PSM item.
1 Enter the PSM menu (see page 4).
2 Select a PSM item.
\;,'~lA\
A,jii.~fl.i'
[Turn] 31.5 Hz •... .- 200.0 Hz
[l] Adjust the continuity of the sound among speakers
(slope).
~1~10a~tll
4 Repeat steps 2 and 3 to adjust the other
PSM items if necessary.
5 Finish the procedure.
Continued on the next page
--

JVC KD-S100 Specifications

General

Brand	JVC
Model	KD-S100
Category	Car Receiver
Language	English