JVC KD-S12 Service Manual

(No.MA216)1-23
3.2.18 Removing the turn table / spindle motor
(See Figs.41 and 42)
• Prior to performing the following procedure, remove the top
cover, connector board, chassis unit and clamper assembly.
(1) Remove the two screws L attaching the spindle motor as-
sembly through the slot of the turn table on top of the body.
(2) Unsolder the wire on the connector board if necessary.
Fig.41
Fig.42
L
Turn table
L
Turn table
Spindle motor

JVC KD-S12 Specifications

General

Brand	JVC
Model	KD-S12
Category	Car Receiver
Language	English