JVC KD-S12 Service Manual

1-6 (No.MA216)
SECTION 3
DISASSEMBLY
3.1 Main body section
3.1.1 Removing the front panel assembly
(See Fig.1)
Push the detach button in the lower right part of the front panel
assembly and remove the front panel assembly.
Fig.1
3.1.2 Removing the bottom cover
(See Fig.2)
• Remove the front panel assembly as required.
From the bottom side of the main body, remove the joints (a, b,
c) attaching the bottom cover.
Note:
When releasing the joints using a screwdriver, do not damage
the main board.
Fig.2
3.1.3 Removing the front chassis assembly
(See Fig.3)
• Remove the front panel assembly and bottom cover.
(1) Remove the two screws A on the both sides of the main
body.
(2) Release the two joints d and two joints e on the both sides
of the main body, then remove the front chassis assembly
toward the front.
Fig.3
Front panel assembly
Detach button
Bottom cover
b
b
c
a
a
Front chassis assembly
A
d e
de

JVC KD-S12 Specifications

General

Brand	JVC
Model	KD-S12
Category	Car Receiver
Language	English