ENGLISH
8
Manual presetting
Ex.: Storing FM station of 92.50MHz into preset number
4 of the FM1 band.
1
2
3
To listen to a preset station
or
Listening to the radio
1
Select “FM/AM.”
2
Select the bands.
3
Search for a station to listen—Auto Search.
Manual Search: Hold either one of the buttons until “M” flashes on the display, then press
it repeatedly.
• When receiving an FM stereo broadcast with sufficient signal strength, “ST” lights up
on the display.
When an FM stereo broadcast is
hard to receive
Reception improves, but stereo effect will be lost.
• “MO” lights up on the display.
To restore the stereo effect, repeat the same
procedure. “MONO OFF” appears and the MO indicator
goes off.
FM station automatic presetting
— SSM (Strong-station Sequential
Memory)
You can preset up to six stations for each band.
1 While listening to a station...
2
Local FM stations with the strongest signals are
searched and stored automatically in the selected FM
band.
• If an HD Radio tuner box is connected, you can also
search and store the AM station automatically.
Preset number flashes for a while.
EN08-13_KD-S25[J]_1.indd 8EN08-13_KD-S25[J]_1.indd 8 5/5/08 2:12:09 PM5/5/08 2:12:09 PM
To Next Page
Loading...
Need help?
General
