15
ENGLISH
Using the Standby Receptions
TA Standby Reception
TA Standby Reception allows the receiver to
switch temporarily to Traffic Announcement
(TA) from any source other than AM.
The volume changes to the preset TA volume
level (see page 43).
• If the DAB tuner is connected, Standby
Reception also works to search for a DAB
service broadcasting Traffic Announcement.
To activate TA Standby Reception
• If the TP indicator lights up, TA Standby
Reception is activated.
• If the TP indicator flashes, TA Standby
Reception is not yet activated. (This occurs
when you are listening to an FM station
without the RDS signals required for TA
Standby Reception.)
To activate TA Standby Reception, tune in to
another station (or DAB service) providing
these signals. The TP indicator will stop
flashing and remain lit.
To deactivate the TA Standby Reception
The TP indicator goes off.
PTY Standby Reception
PTY Standby Reception allows the receiver
to switch temporarily to your favorite PTY
programme from any source other than AM.
• If the DAB tuner is connected, Standby
Reception also works to search for a DAB
service.
To select your favorite PTY code for PTY
Standby Reception, see page 43.
The PTY indicator either lights up or flashes.
To activate the PTY Standby Reception
1 Enter the MODE menu (see page 5).
2 Select “PTY.”
3 Select one of the PTY codes.
4 Finish the procedure.
• If the PTY indicator lights up, PTY
Standby Reception is activated.
• If the PTY indicator flashes, PTY Standby
Reception is not yet activated.
To activate PTY Standby Reception,
tune in to another station (or DAB
service) providing these signals. The PTY
indicator will stop flashing and remain lit.
To deactivate the PTY Standby Reception
Select “Off” in step 3 above.
The PTY indicator goes off.
TP indicator appears.
T/P
T/P
Selected PTY code
PTY indicator appears.
EN13-16_KD-SHX851[EX_EU]f.indd 15EN13-16_KD-SHX851[EX_EU]f.indd 15 05.4.8 8:47:39 PM05.4.8 8:47:39 PM
To Next Page
Loading...
Need help?
General
