22
ENGLISH
Adjusting the sound
You can adjust the sound characteristics to your preference.
SOUND ADJUSTMENTS
1
2
CD
CD-CH
FM/AM
1
Select the item you want to adjust.
Indication To do: Range
BAS Adjust the bass –06 (min.) — +06 (max.)
(Bass)
TRE Adjust the treble –06 (min.) — +06 (max.)
(Treble)
FAD Adjust the front and rear speaker R06 (rear only) — F06 (front only)
(Fader)* balance
BAL Adjust the left and right speaker L06 (left only) — R06 (right only)
(Balance) balance
LOUD Boost low and high frequencies to LOUD ON — LOUD OFF
(Loudness) produce a well-balanced sound at low
volume level.
VOL Adjust the volume 00 (min.) — 50 (max.)
(Volume)
Note:
* If you are using a two-speaker system, set the fader level to “00.”
2
Adjust the level.
Note:
Normally the control dial works for volume adjustment. So you do
not have to select “VOL” to adjust the volume level.
BAS TRE FAD
BAL
VOL
LOUD
Equalization pattern indicator
Equalization pattern changes as
you adjust the bass or treble.
EN22-25.KD-SX979R[E]/f 00.1.20, 1:39 PM22
To Next Page
Loading...
Need help?
General
