EasyManuals Logo
Home>JVC>Car Receiver>KD-T408

JVC KD-T408 User Manual

JVC KD-T408
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
ENGLISH
11
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
[VOLUME ADJUST] [LEVEL–15] to [LEVEL+06] ([LEVEL 00]): Presets the initial volume
level of each source by comparing to the FM volume level. (Before
adjustment, select the source you want to adjust. “VOL ADJ FIX” appears
if FM is selected.)
[AMPGAIN]
[LOWPOWER]: Limits the maximum volume level to 25. (Select if the
maximum power of each speaker is less than 50 W to prevent damaging
the speakers.) ; [HIGHPOWER]: The maximum volume level is 35.
[D.T.EXPANDER]
(Digital Track
Expander)
[ON]: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost in
audio data compression. ; [OFF]: Cancels.
[SPK/PREOUT] Depending on the speaker connection method, select the appropriate
setting for the desired output. (See “Speaker output settings”.)
*1 Displayed only when [SUBWOOFER SET] is set to [ON]. (Page 10)
*2 Displayed only when [SPK/PREOUT] is set to [SUB.W/SUB.W].
*3 Displayed only when [SPK/PREOUT] is set to [REAR/SUB.W] or [SUB.W/SUB.W].
*4 Selectable only if a setting other than [FRQTHROUGH] is selected for [SUBWOOFERLPF].
(Page 10)
*5 This adjustment will not affect the subwoofer output.
AUDIO SETTINGS
Speaker output settings
[SPK/PRE OUT]
Select the output setting for the speakers
[SPK/PRE OUT]
, based on the speaker
connection method.
Connection via lineout terminals
For connections through an external amplifier. (Page21)
KD-T408:
Setting on
[SPK/PRE OUT]
Audio signal through lineout terminal
FRONT REAR SW
[REAR/REAR] (default) Front speakers
output
Rear speakers output Subwoofer output
[SUB.W/SUB.W] Front speakers
output
L (left): Subwoofer output
R (right): (Mute)
Subwoofer output
KD-T406/KD-T401:
Setting on
[SPK/PRE OUT]
Audio signal through lineout terminal
REAR/SW
[REAR/REAR] Rear speakers output
[REAR/SUB.W] (default) Subwoofer output
[SUB.W/SUB.W] Subwoofer output
JS_JVC_KD_T408_M_EN_3.indd 11JS_JVC_KD_T408_M_EN_3.indd 11 27/6/2018 11:58:31 AM27/6/2018 11:58:31 AM

Other manuals for JVC KD-T408

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-T408 and is the answer not in the manual?

JVC KD-T408 Specifications

General IconGeneral
BrandJVC
ModelKD-T408
CategoryCar Receiver
LanguageEnglish

Related product manuals