EasyManuals Logo
Home>JVC>Car Receiver>KD-T805BTS

JVC KD-T805BTS User Manual

JVC KD-T805BTS
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
ENGLISH
31
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
DISPLAY SETTINGS
[COLOR] (for KD-T905BTS/KD-T900BTS/KD-T805BTS/KD-TD90BTS)
[PRESET] Selects illumination colors for the buttons on different zones separately.
1
Select a zone ([ZONE1], [ZONE2], [ALLZONE]). (See the illustration on
page 30.)
2
Select a color for the selected zone.
[COLOR01] to [COLOR49]
[USER]: The color you have created for [DAYCOLOR] or
[NIGHTCOLOR] is shown.
[COLORFLOW01] to [COLORFLOW03]: Color changes at different
speeds.
[CRYSTAL]/[FLOWER]/[FOREST]/[GRADATION]/[OCEAN]/[RELAX]/
[SUNSET]: The selected color pattern is shown.*4 (Selectable only
when [ALLZONE] is selected in step 1.)
[DAYCOLOR] Stores your own day and night illumination colors for different zones.
1
Select a zone ([ZONE1], [ZONE2]). (See the illustration on page 30.)
2
[RED]/[GREEN]/[BLUE]: Select a primary color.
3
[00] to [31]: Select the level.
Repeat steps 2 and 3 for all the primary colors.
Your setting is stored to [USER] in [PRESET].
[NIGHTCOLOR] or [DAYCOLOR] is changed by turning on or off your
car’s headlights.
[NIGHTCOLOR]
[COLOR GUIDE]
[ON]: The illumination color of [ZONE1] and [ZONE2] change to white
color when settings are performed on menu and list search, except in color
setting mode. ; [OFF]: Cancels.
*1 The illumination control wire connection is required. (Page 40)
*2 Some characters or symbols will not be shown correctly (or will be blank).
*3 Functionality depends on the type of phone used.
*4 If one of these color patterns is selected, the [ZONE1] and [ZONE2] illumination colors will
change to the default colors.
REFERENCES
Maintenance
Cleaning the unit
Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Cleaning the connector
Detach the faceplate and clean the connector gently
with a cotton swab. Be careful not to damage the
connector.
Handling discs
Do not touch the recording surface of the disc.
Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
Do not use any accessories for the disc.
Clean from the center of the disc and move outward.
Clean the disc with a dry silicone or soft cloth. Do not use any solvents.
When removing a disc from this unit, pull it out horizontally.
Remove burrs from the center hole and disc edge before inserting a disc.
More information
For: Latest firmware updates and latest compatible item list
JVC original application
Any other latest information
Visit <www.jvc.net/cs/car/>.
General
This unit can only play the following CDs:
DualDisc playback: The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc
Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product cannot
be recommended.
For detailed information and notes about the playable audio files, visit
<www.jvc.net/cs/car/audiofile/>.
Connector (on the reverse
side of the faceplate)
JS_JVC_KD_T905BTS_K_EN_08.indd 31JS_JVC_KD_T905BTS_K_EN_08.indd 31 6/4/2018 11:36:06 AM6/4/2018 11:36:06 AM

Table of Contents

Other manuals for JVC KD-T805BTS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-T805BTS and is the answer not in the manual?

JVC KD-T805BTS Specifications

General IconGeneral
BrandJVC
ModelKD-T805BTS
CategoryCar Receiver
LanguageEnglish

Related product manuals