EasyManuals Logo
Home>JVC>Receiver>KD-X282DBT

JVC KD-X282DBT User Manual

JVC KD-X282DBT
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
ENGLISH
9
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Analog Radio
The unit switches to FM alarm automatically when receiving an alarm signal
from FM broadcast.
Search for a station
1
Press B SRC repeatedly to select FM or AM.
2 Press S / T to search for a station automatically.
(or)
Press and hold S / T until “M” flashes, then press repeatedly to
search for a station manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM.
Store a station
While listening to a station...
Press and hold one of the number buttons (1 to 6).
(or)
1 Press and hold the volume knob until “PRESETMODE” flashes.
2 Turn the volume knob to select a preset number, then press the knob.
“MEMORY” appears once the station is stored.
Select a stored station
Press one of the number buttons (1to6).
(or)
1 Press .
2 Turn the volume knob to select a preset number, then press the knob.
Other settings
1
Press and hold .
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press
.
Default: [XX]
[TUNER SETTING]
[SSM]
[SSM01–06]/[SSM07–12]/[SSM13–18]: Automatically presets up to 18
stations for FM. “SSM” stops flashing when the first 6 stations are stored. Select
[SSM07–12]/[SSM13–18] to store the following 12 stations.
[LOCAL SEEK]
[ON]: Searches only FM stations with good reception. ; [OFF]: Cancels.
Settings made are applicable only to the selected source/station. Once you
change the source/station, you need to make the settings again.
[IF BAND]
[AUTO]: Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.) ; [WIDE]: Subjects to
interference noises from adjacent FM stations, but sound quality will not be
degraded and the stereo effect will remain.
KD-X282DBT_E_B5A-3845-00_EN_1st Draft.indd 9KD-X282DBT_E_B5A-3845-00_EN_1st Draft.indd 9 7/9/2021 4:26:57 PM7/9/2021 4:26:57 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-X282DBT and is the answer not in the manual?

JVC KD-X282DBT Specifications

General IconGeneral
DIN size1 DIN
Impedance75 Ω
Output power200 W
Product colorBlack
Volume controlRotary
Frequency range531 - 1611 Hz
Disc types supported-
Audio output channels7.1 channels
Maximum power per channel50 W
Signal-to-Noise Ratio (SNR)6.2 dB
Mobile operating systems supportedYes
CD-R playbackNo
Audio formats supportedFLAC, MP3, WAV, WMA
Display typeLCD
Illumination colorRed, White
Bluetooth version4.2
USB port positionFront
Bluetooth profilesAVRCP
USB connector typeUSB Type-A
USB ports quantity1
Bluetooth functionsAudiostreaming, Handsfree calling
FM band range87.5 - 108 MHz
LW band range153 - 279 kHz
FM usable sensitivity6.2
Supported radio bandsDAB, FM, LW, MW
Preset stations quantity42
Hands-free callingKeep your hands on wheel with Bluetooth™ Hands-free calling. After pairing your compatible Bluetooth mobile phone to your TomTom GPS, you’ll be able to see incoming call information, make and answer calls, and talk hands-free through your device. You’ll e
Weight and Dimensions IconWeight and Dimensions
Depth100 mm
Width182 mm
Height53 mm
Weight60 g

Related product manuals