EasyManuals Logo
Home>JVC>Receiver>KD-X282DBT

JVC KD-X282DBT User Manual

JVC KD-X282DBT
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
ENGLISH
27
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Display Settings
Zone identification for brightness settings
1 Press and hold .
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press
.
Default: [XX]
[DISPLAY]
[DIMMER]
Dims the illumination.
[OFF]: Dimmer is turned off. Brightness changes to [DAY] setting.
[ON]: Dimmer is turned on. Brightness changes to [NIGHT] setting.
(See the following “[BRIGHTNESS]” settings.)
[DIMMER TIME]: Set the time to turn on dimmer and to turn off dimmer.
1
Turn the volume knob to adjust the [ON] time, then press the knob.
2
Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: [18:00] ; [OFF]: [6:00])
[DIMMER AUTO]: Dimmer turns on and off automatically when you turn off
or on the car headlights.*1
[BRIGHTNESS] Sets the brightness for day and night separately.
1
[DAY]/[NIGHT]: Select day or night.
2
Select a zone. (See the illustration on the left column.)
3
[LEVEL00] to [LEVEL31]: Set the brightness level.
[TEXT SCROLL]*2
[SCROLL ONCE]: Scrolls the display information once. ;
[SCROLL AUTO]: Repeats scrolling at 5-second intervals. ;
[SCROLL OFF]: Cancels.
Not applicable to Dynamic Label display information (page 28) while in
DAB source.
*1 The illumination control wire connection is required. (Page 33)
*2 Some characters or symbols will not be shown correctly (or will be blank).
KD-X282DBT_E_B5A-3845-00_EN_1st Draft.indd 27KD-X282DBT_E_B5A-3845-00_EN_1st Draft.indd 27 7/9/2021 4:26:59 PM7/9/2021 4:26:59 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-X282DBT and is the answer not in the manual?

JVC KD-X282DBT Specifications

General IconGeneral
DIN size1 DIN
Impedance75 Ω
Output power200 W
Product colorBlack
Volume controlRotary
Frequency range531 - 1611 Hz
Disc types supported-
Audio output channels7.1 channels
Maximum power per channel50 W
Signal-to-Noise Ratio (SNR)6.2 dB
Mobile operating systems supportedYes
CD-R playbackNo
Audio formats supportedFLAC, MP3, WAV, WMA
Display typeLCD
Illumination colorRed, White
Bluetooth version4.2
USB port positionFront
Bluetooth profilesAVRCP
USB connector typeUSB Type-A
USB ports quantity1
Bluetooth functionsAudiostreaming, Handsfree calling
FM band range87.5 - 108 MHz
LW band range153 - 279 kHz
FM usable sensitivity6.2
Supported radio bandsDAB, FM, LW, MW
Preset stations quantity42
Hands-free callingKeep your hands on wheel with Bluetooth™ Hands-free calling. After pairing your compatible Bluetooth mobile phone to your TomTom GPS, you’ll be able to see incoming call information, make and answer calls, and talk hands-free through your device. You’ll e
Weight and Dimensions IconWeight and Dimensions
Depth100 mm
Width182 mm
Height53 mm
Weight60 g

Related product manuals