EasyManuals Logo
Home>JVC>Receiver>KD-X368BT

JVC KD-X368BT User Manual

JVC KD-X368BT
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
ENGLISH
13
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Pair and connect a Bluetooth device for the first time
1
Press source button to turn on the unit.
2 Search and select the name of your receiver (“KD-X4 BT”/ “KD-X3 BT”) on the Bluetooth
device.
“BT PAIRING” flashes on the display.
For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN)
code immediately after searching.
3 Perform (A) or (B) depending on what appears on the display.
For some Bluetooth devices, pairing sequence may vary from the steps described below.
(A) KD-X462BT:
“Device Name” “XXXXXX” “VOL–YES” “BACK–NO”
KD-X368BT:
“Device Name” “XXXXXX” “ENTER–YES” “BACK–NO”
“XXXXXX” is a 6-digit passkey randomly generated during each pairing.
Ensure that the passkeys appear on the unit and Bluetooth device are the same.
Press the following to confirm the passkey.
KD-X462BT: Volume knob
KD-X368BT: * ENTER
Operate the Bluetooth device to confirm the passkey.
(B) KD-X462BT:
“Device Name” “VOL–YES” “BACK–NO”
KD-X368BT:
“Device Name” “ENTER–YES” “BACK–NO”
Press the following to start pairing.
KD-X462BT: Volume knob
KD-X368BT: * ENTER
If “PAIRING” “PIN 0000” scrolls on the display, enter the PIN code “0000” into the
Bluetooth device.
You can change to a desired PIN code before pairing. (Page 18)
If only “PAIRING” appears, operate the Bluetooth device to confirm pairing.
BLUETOOTH®
Depending on the operating system and the
firmware version of your mobile phone, Bluetooth
features may not work with this unit.
BLUETOOTH — Connection
Supported Bluetooth profiles
Hands-Free Profile (HFP)
Advanced Audio Distribution Profile (A2DP)
Audio/Video Remote Control Profile (AVRCP)
Serial Port Profile (SPP)
Phonebook Access Profile (PBAP)
Supported Bluetooth codecs
Sub Band Codec (SBC)
Advanced Audio Coding (AAC)
Connect the microphone
Adjust the microphone
angle
Secure using cord clamps (not
supplied) if necessary.
Microphone input jack
Microphone (supplied)
Rear panel
JS_JVC_KD_X462BT_M_EN_1.indd 13JS_JVC_KD_X462BT_M_EN_1.indd 13 6/5/2018 11:06:05 AM6/5/2018 11:06:05 AM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-X368BT and is the answer not in the manual?

JVC KD-X368BT Specifications

General IconGeneral
BrandJVC
ModelKD-X368BT
CategoryReceiver
LanguageEnglish

Related product manuals