EasyManuals Logo
Home>JVC>Car Receiver>KD-X472DBT

JVC KD-X472DBT User Manual

JVC KD-X472DBT
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
10
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Bluetooth®
(for KD-X472DBT/KD-X272DBT)
Depending on the Bluetooth version, operating system and the
firmware version of your mobile phone, Bluetooth features may not
work with this unit.
Be sure to turn on the Bluetooth function of the device to make the
following operations.
Signal conditions vary depending on the surroundings.
Connect the microphone
Connect the supplied microphone to the microphone input jack on the rear
panel.
Adjust the
microphone
angle
Secure using cord
clamps (not supplied)
if necessary.
Pair and connect a Bluetooth device for the first time
1 Press B SRC to turn on the unit.
2 Search and select the name of your receiver (“KD-X472DBT”/
“KD-X272DBT”) on the Bluetooth device.
3 Perform (A) or (B) depending on what appears on the display.
For some Bluetooth devices, pairing sequence may vary from the steps
described below.
(A) “[Device Name]”
“XXXXXX” “VOL–YES” “BACK–NO”
“XXXXXX” is a 6-digit passkey randomly generated during each pairing.
Ensure that the passkeys appear on the unit and Bluetooth device
are the same.
Press the volume knob to confirm the passkey.
Operate the Bluetooth device to confirm the passkey.
(B) “[Device Name]”
“VOL–YES” “BACK–NO”
Press the volume knob to start pairing.
If “PAIRING” “PIN 0000” scrolls on the display, enter the PIN code
“0000” into the Bluetooth device.
If only “PAIRING” appears, operate the Bluetooth device to confirm
pairing.
“PAIRING COMPLETED” appears when pairing is completed and “
” will light
up when the Bluetooth connection is established.
Answer a call
Press or the volume knob.
To adjust the phone volume
[00]
to
[35]
, turn the volume knob.
To end a call, press and hold or the volume knob.
Audio player via Bluetooth
1 Press B SRC repeatedly to select BTAUDIO.
For KD-X272DBT: Pressing enters BT AUDIO directly.
2 Operate the audio player via Bluetooth to start playback.
To On the faceplate
Play back/pause Press the volume knob.
Select group or folder
Press 2 J / 1 K.
Reverse skip/Forward skip
Press S / T.
Reverse/Fast-forward
Press and hold S / T.
Repeat play
Press 4 repeatedly.
Random play
Press 3 repeatedly.
JS_JVC_QSG_KD_X472DBT_E_EN_int1.indd 10JS_JVC_QSG_KD_X472DBT_E_EN_int1.indd 10 9/5/2019 11:10:57 AM9/5/2019 11:10:57 AM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-X472DBT and is the answer not in the manual?

JVC KD-X472DBT Specifications

General IconGeneral
DIN size1 DIN
Output power50 W
Product colorBlack
Ready for iPodYes
Volume controlRotary
Disc types supportedNo
Audio output channels- channels
Equalizer bands quantity13
Audio formats supportedAAC, FLAC, MP3, SBC, WAV, WMA
Display typeLCD
Illumination colorWhite
Display number of lines2 lines
Bluetooth version4.2
USB port positionFront
Bluetooth profilesA2DP, AVRCP, HFP, PBAP
Line outputs (RCA)3
USB connector typeUSB Type-A
USB ports quantity1
Bluetooth functionsAudiostreaming, Handsfree calling
Headphone connectivity3.5mm
AM band range531 - 1611 kHz
FM band range87.5 - 108 MHz
LW band range153 - 279 kHz
Supported radio bandsAM, DAB+, FM
Preset stations quantity18
Hands-free callingKeep your hands on wheel with Bluetooth™ Hands-free calling. After pairing your compatible Bluetooth mobile phone to your TomTom GPS, you’ll be able to see incoming call information, make and answer calls, and talk hands-free through your device. You’ll e

Related product manuals