6
Tuner
Tuner
Tuner basic operations
1 Press < > to display the HOME screen.
2 Turn the volume knob to select [FM] or [AM],
then press the knob.
3 Press <E>/<F> to search for a station
automatically.
“Auto Seek” appears.
(or)
Press and hold <E>/<F> repeatedly to
search for a station manually.
“Manual Seek” appears.
✎ NOTE
• To store stations, perform [Manual Store] or [Auto
Store].
Ñ Select a stored station
You can preset 15 stations for FM and 15 stations
for AM.
1 Press < > to display the LIST screen.
2 Turn the volume knob to select a preset
number, then press the knob.
✎ NOTE
• To exit, press <
>.
Tuner function settings
1 Press < > to display the function menu.
2 Turn the volume knob to select the item to set
(see the table below), then press the knob to
make a selection.
3 Press < >.
Manual
Store
Stores a station manually.
While listening to a station you want to
store, turn the volume knob to select a
preset number, then press the knob.
Auto
Store
Automatically searches and stores the 15
stations with the strongest signals for the
selected band.
• “Auto Store” appears.
Local
Seek
Tunes in only to the stations with sufficient
signal strength.
“ON”, “OFF” (Default)
Area N.AMERICA (Default): For North America,
AM/FM intervals: 10 kHz/200 kHz
S.AMERICA: For Central/South America,
AM/FM intervals: 10 kHz/50 kHz
EUROPE: For Europe, AM/FM intervals: 9
kHz/50 kHz.
Mono *
1
Determines whether to receive stereo
broadcasts in the stereo mode or
monaural mode.
“ON”, “OFF” (Default)
RDS
Clock
Sync *
1
Synchronizing the Radio Data System
station time data and this unit’s clock.
“ON” (Default), “OFF”
*1 FM only
B5K-0634-10_K_EnFrEs.indb 6 2019/03/05 20:36