To Next Page

To Previous Page

English |

Setup

Continued on the next page...

Setup

Settings

1 Press and hold < > to display the settings.

2 Press <E>/<F> to select the category.

3 Turn the volume knob to select an item (see the

following table), then press the knob.

4 Repeat step 3 until the desired item is selected/

activated or follow the instructions stated on

the selected item.

5 Press < >.

Audio Settings

Fader R12 — F12 (00): Adjusts the front and

rear speaker output balance.

Balance L12 — R12 (00): Adjusts the left and

right speaker output balance.

General Settings

Beep ON/OFF: Activates or deactivates the

keypress tone. Default is “ON”.

Date/Clock Adjusts the date and clock. (P.3)

Language Selects the text language used for on-

screen information.

Time

Format

12h/24h: Selects time format. Default

is “12h”.

Wallpaper Black/Blue: Selects the wallpaper

image.

Demo Set the demonstration mode. Default

is “ON”.

Initialize Select [Initialize] and then select [Yes]

to set all the settings to the initial

default settings.

Bluetooth Settings

Sync

Phonebook

ON/OFF: Activates or deactivates the

synchronization of the phonebook

in the connected smartphone with

the unit.

Information

Displays the information about the

connected Bluetooth device (device

name, phone name, and mac address).

Sound settings

1 Press < > to display the sound setting.

2 Turn the volume knob to select an item (see the

following table), then press the knob.

3 Repeat step 2 until the desired item is selected/

activated or follow the instructions stated on

the selected item.

4 Press < >.

Graphic

Equalizer

Selects a preset equalizer suitable to the

music genre.

Flat / DRVN / Hard Rock / Hip Hop / Jazz

/ Pop/ R & B / User / Classical

Select [User] to use the settings made

1) Press the volume knob to select the

frequency.

2) Turn the volume knob to adjust the

level.

3) Press <

Loudness Sets the amounts of boost of low and

high tones.

“ON”, “OFF” (Default)

X’over You can set the crossover frequency of

speakers.

1) Press <E>/<F> to select the

speaker.

2) Press the volume knob to select the

item.

3) Turn the volume knob to adjust the

value.

4) Press <

Delay Adjust the sound delay time so that the

sounds from different speakers arrive at

the listener sitting on the selected seat

at the same time.

1) Press <E>/<F> to select the

speaker.

2) Turn the volume knob to adjust the

value.

3) Press <

B5K-0634-10_K_EnFrEs.indb 9 2019/03/05 20:36

Other manuals for JVC KD-X560BT

Instruction Manual28 pages

Questions and Answers:

Need help?

Do you have a question about the JVC KD-X560BT and is the answer not in the manual?

JVC KD-X560BT Specifications

General

Dimmer	Yes
DIN size	1 DIN
Output power	180 W
Product color	Black
Volume control	Rotary
Disc types supported	No
Audio output channels	- channels
Maximum power per channel	16 W
Bluetooth version	3.0+HS
Bluetooth profiles	A2DP, AVRCP
USB ports quantity	1
Aspect ratio	16:9
Display diagonal	3 \
Illumination color	Blue
Audio formats supported	AAC, MP3, WAV, WMA
Image formats supported	BMP, JPG, PNG
Video formats supported	AVI, H.264, MPEG1, MPEG2, MPEG4
Hands-free calling	Keep your hands on wheel with Bluetooth™ Hands-free calling. After pairing your compatible Bluetooth mobile phone to your TomTom GPS, you’ll be able to see incoming call information, make and answer calls, and talk hands-free through your device. You’ll e
FM band range	87.9 - 107.9 MHz
Supported radio bands	AM, FM
Preset stations quantity	30
Package weight	1180 g