(Hold)
If no operation is done for about 60 seconds, the
operation will be canceled.
1
2
3
Repeat step 2 if necessary.
To return to the previous menu, press .
To exit from the menu, press DISP or MENU.
Menu item
Selectable setting (Initial: [XX])
DEMO
For settings, ' page 4.
Clock
Clock Display On: Shows the clock display when the power is off.
[Off]: Cancels.
Set Clock
For settings, ' page 4.
24H/12H
For settings, ' page 4.
Clock Adjust Off: Cancels.
[Auto]: The built-in clock is automatically adjusted using the clock data
provided via the Satellite Radio channel.
Time Zone *1*2
[Eastern]/Atlantic/Newfndlnd/Alaska/Pacific/Mountain/Central:
Selects your residential area from one of the time zones for clock adjustment.
DST *1*2 [On]: Activates daylight savings time if your residential area is subject to
DST.
Off: Cancels.
Color
For settings, ' page 22.
Color Setup
Dimmer
Dimmer Set Selects the display and button illumination adjusted in the <Brightness>/
<Color Setup> setting.
Off: Selects the Day adjustments.
On: Selects the Night adjustments.
[Auto]: Changes between the Day and Night adjustments when you turn
off/on the car headlights. *3
Time Set: Sets the start/end timer for dimmer. Turn the control dial to
adjust the start time, then press the control dial to confirm. Repeat this step
to enter the end time.
Brightness Day Brightness[31]/Night Brightness[15]: Brightness settings for the
display and button illumination for day and night.
Button Zone/Display Zone: Sets the brightness levels 00 — 31.
Display
Scroll *4 Off: Cancels.
[Once]: Scrolls the display information once.
Auto: Repeats scrolling (at 5-second intervals).
Tag Display [On]: Shows the TAG information while playing MP3/WMA/WAV tracks.
Off: Cancels.
LCD Type [Negative]: Negative pattern of the display.
Positive: Positive pattern of the display.
Auto: Positive pattern will be selected during the day*5, while negative will
be selected during the night*5.
Contrast Level 01 — Level 15 [Level 09]: Adjusts the contrast of the display to
make indications clear and legible.
*1 Displayed only when SIRIUS Satellite Radio or XM Satellite Radio is connected.
*2
Displayed only when <Clock Adjust> is set to <Auto>.
*3 The illumination control lead connection is required. (See “Installation/Connection Manual”.)
This setting may not work correctly on some vehicles (particularly on those having a control
dial for dimming). In this case, change the setting to other than <Dimmer Auto>.
*4 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*5 Depends on the <Dimmer Set> setting.
Menu operations
Menu operations
24
|ޓENGLISH
2012/2/17ޓ18:13:23KD-X80BT_J_EN
To Next Page
Loading...
Need help?
General
