JVC KS-F185 Service Manual

(No.MA094B)1-5
SECTION 3
DISASSEMBLY
3.1 Main body
3.1.1 Removing the front panel assembly
(See Fig.1)
(1) Push the detach button and remove the front panel assem-
bly.
Fig.1
3.1.2 Removing the bottom cover
(See Fig.2)
• Prior to performing the following procedures, remove the front
panel assembly.
(1) Turn the body upside down.
(2) Insert a screwdriver under the joints to release the two
joints a on the left side, the two joints b on the right side and
the joint c on the back of the body, then remove the bottom
cover from the body.
CAUTION:
When releasing the joints using a screwdriver, do not damage
the board.
Fig.2
3.1.3 Removing the front chassis assembly
(See Fig.3)
• Prior to performing the following procedures, remove the front
panel assembly and bottom cover.
(1) Remove the two screws A on each side of the body.
(2) Release the two joints d and the two joints e on the sides,
then remove the front chassis assembly toward the front.
Fig.3
Front panel assembly
Detach button
Bottom cover
Joint
b
Joint b
Joint c
Joint a
Joint a
Joint d
Front chassis assembly
A
Joint e
Joint d Joint e

JVC KS-F185 Specifications

General

Brand	JVC
Model	KS-F185
Category	Car Receiver
Language	English