(Hold)
If no operation is done for about 60 seconds, the
operation will be canceled.
1
2
3
Repeat step 2 if necessary.
To return to the previous menu, press .
To exit from the menu, press DISP or MENU.
Menu item
Selectable setting (Initial: [XX])
DEMO
For settings, ' page 4.
CLOCK
COLOR
For settings, ' page 11.
COLOR SETUP
DIMMER
DIMMER SET Selects the display and button illumination adjusted in the <BRIGHTNESS>/
<COLOR SETUP> setting.
[AUTO]: Changes between the Day and Night adjustments when you turn
off/on the car headlights. *1
ON: Selects the Night adjustments.
OFF: Selects the Day adjustments.
BRIGHTNESS
DAY[31]/NIGHT[15]: Brightness settings for the display and button
illumination for day and night.
BUTTON ZONE/DISP ZONE: Sets the brightness levels 00 — 31.
DISPLAY
SCROLL *2 [ONCE]: Scrolls the display information once.
AUTO: Repeats scrolling (at 5-second intervals).
OFF: Cancels.
TAG DISPLAY [ON]: Shows the TAG information while playing MP3/WMA tracks.
OFF: Cancels.
PRO EQ
For settings, ' page 12.
AUDIO
FADER *3*4
R06 — F06[00]: Adjusts the front and rear speaker output balance.
BALANCE *4
L06 — R06[00]: Adjusts the left and right speaker output balance.
LOUD
(Loudness)
ON: Boosts low and high frequencies to produce a well-balanced sound at
a low volume level.
[OFF]: Cancels.
VOL ADJUST
(Volume adjust)
-05 — +05[00]: Presets the volume adjustment level of each source,
compared to the FM volume level. Before adjustment, select the source you
want to adjust. (“VOL ADJ FIX” appears if “FM” is selected.)
L/O MODE
(Line output
mode)
Select if the LINE OUT (REAR) terminals on the rear panel are connected to
the speakers or subwoofer through an external amplifier.
SUB.W: Subwoofer
[REAR]: Speakers
*1 The illumination control lead connection is required. (See “Installation/Connection Manual”.)
This setting may not work correctly on some vehicles (particularly on those having a control
dial for dimming). In this case, change the setting to other than <DIMMER AUTO>.
*2 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*3 If you are using a two-speaker system, set the fader level to “00”.
*4 This adjustment will not affect the subwoofer output.
Menu operations
Menu operations
14
|ޓENGLISH
To Next Page
Loading...
Need help?
General
