SettingsSettings
4 Repeat steps 2 and 3 to register other
buttons.
5 Touch [Done] to finish procedure.
• The unit can register/change all of the buttons’
functions at the same time. To do this, press all
buttons in turn and after pressing all of them, touch
[Done] on the <Steering Remote Control Setting>
screen. However, new functions cannot be learned
after this operation.
• When changing the functions already learned, touch
the assigned function you want to change in step 3
and then touch to select the new function from the
function list.
• Confirm the contents of the settable functions in the
function list. You cannot edit the function list.
To initialize the setting: Touch [Initialize] for
<Steering Remote Control Setting>.
• A confirmation message appears. Touch [Yes].
– To cancel the initialization, touch [No].
<System Information>
Update the system by connecting a USB device
containing an update file.
• To obtain the update file, visit
<http://www.jvc.net/cs/car/>.
Connect a USB device with the update file to the unit.
System Information
<Application Version>
Updates the system application.
<System Version>
Updates the system.
• If you turned the power off then on or turn the
ignition switch off then on after selecting <Update>,
the unit will reset.
<DVD Version>
Updates the DVD system application.
The system update starts. It may take a while.
If the update has been completed successfully,
“Update Completed” appears, then reset the unit.
• Do not disconnect the USB device while updating.
• If the update has failed, perform the following, then
retry the update:
KW-V250BT/KW-V25BT: Turn the ignition switch off
then on
KW-V350BT: Turn the power off then on
<Open Source Licenses>
Shows the Open Source Licenses.
Key settings
Display the <Key Customize> screen.
On the Home screen, touch as follows:
Then, on the <Settings> screen, touch [Key].
Settings
Equalizer
Sound Effect
Fader / Balance
Speaker / X’over
Time Alignment
Enter
Enter
Enter
Enter
Enter
Display
Input
System
Audio
Key
E.g. Key settings screen for KW-V250BT/KW-V25BT
<Key Customize>
You can customize the pop-up short-cut menu (page
8).
• For KW-V250BT/KW-V25BT, you can also customize
the (favorite) button.
1 Select the menu to customize.
FNC
Screen
Adjustment
Rear Camera
-
Settings Background
Key1 Key2
Favorite
Key3 Key4
Key Customize
Sound Effect
• To customize the (favorite) button, touch the
icon under favorite instead.
49
ENGLISH
00_KWV_2019ST_KR.indb 4900_KWV_2019ST_KR.indb 49 1/6/2018 8:19:22 AM1/6/2018 8:19:22 AM
To Next Page
Loading...
Need help?
General
