Tuner
36
Ñ Function panel
1
Touch [ ] on the left side of the screen.
The functions of each key are as follows.
[TI] (FM only)
Sets the traffic information mode on. For details,
see Traffic Information (P.38).
[SETUP]
Displays the TUNER SETUP screen. For details, see
Tuner Setup (P.38).
[SSM] (FM only)
Presets stations automatically. For details, see
Auto memory (P.36).
[PTY] (FM only)
Searches a program by setting program type. For
details, see Search by program type (P.37).
[MONO] (FM only)
Select the Monaural reception.
Memory Operation
Ñ Auto memory (FM only)
You can store stations with good reception in
memory automatically.
1
Touch [FM].
2
Touch [ ] on the left side of the screen.
Touch [SSM].
3
Touch [Ye s ].
Auto memory starts.
Ñ Manual memory
You can store the current receiving station in
memory.
1
Select a station you wish to store in
memory.
2
Touch [FM#] (#:1-15) or [AM#] (#:1-5) in
which you want to store the station for 2
seconds until a beep sounds.
!B5A-2303-00b_18KWV-K_En.indb 36 2018/01/09 18:26
To Next Page
Loading...
Need help?
General
