18
ENGLISH
Sound adjustments
Selecting preset sound modes
(EQ: equalizer)
You can select a preset sound mode suitable to
the music genre.
~
Ÿ
FLAT O Hard Rock O R & B O
POP O JAZZ O DanceMusic O
Country O Reggae O Classic O
USER 1 O USER 2 O USER 3 O
(back to the beginning)
To select the sound mode directly
You can select the sound mode directly using
the remote controller.
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
2
Indication Range
FADER*
1
Adjust the front and rear
speaker balance.
R06 (Rear only)
to
F06 (Front only)
BAL (balance)
Adjust the left and right
speaker balance.
L06 (Left only)
to
R06 (Right only)
LOUD
(loudness)
Boost low and high
frequencies to produce a
well-balanced sound at low
volume level.
LOUD ON
LOUD OFF
VOLUME*
2
Adjust the volume.
00 (min.) to
30 or 50 (max.)*
3
*
1
If you are using a two-speaker system, set
the fader level to “00.”
*
2
Normally the control dial works as the
volume control. So you do not have to select
“VOLUME” to adjust the volume level.
*
3
Depending on the amplifier gain control
setting. (See page 22 for details.)
EN18-27_KW-XC400[J]f.indd 18EN18-27_KW-XC400[J]f.indd 18 10/24/05 10:10:55 AM10/24/05 10:10:55 AM
To Next Page
Loading...
Need help?
General
