26
ENGLISH
Storing channels in memory
You can preset six channels for each band.
Ex.: Storing a channel into preset number 4.
1 Tune in to a channel you want.
2
Listening to a preset channel
1 Select either SIRIUS Satellite radio
or XM Satellite radio.
2 Select the preset channel (1 – 6) you
want.
To change the display information while
listening to a channel
Category name = Channel name = Artist name
= Composer name* = Song/program name/title
=
(back to the beginning)
*
Only for SIRIUS Satellite radio.
1 Select a category (Category Search).
2 Select a channel for listening.
If no operation is done for about
7 seconds, Category Search is canceled.
In Channel Search, channel name and
channel number appear on the display
during search.
• While searching, invalid and unsubscribed
channels are skipped.
Checking the XM Satellite radio ID
While selecting “XM1,” “XM2,” or
“XM3,” select “Channel 0.”
The display alternately shows “RADIO ID” and
the 8-digit (alphanumeric) ID number.
To cancel the ID number display, select any
channel other than “Channel 0.”
Ex.: When you select ”COUNTRY”
for Category Search
Current channel number
Preset number flashes for
a while.
EN18-27_KW-XC400[J]f.indd 26EN18-27_KW-XC400[J]f.indd 26 10/19/05 5:38:11 PM10/19/05 5:38:11 PM
To Next Page
Loading...
Need help?
General
