14
3 Initial Setup
Turning the TV On for the First Time
1. Connect one end of the RF coaxial cable to the aerial
socket on the wall and the other end of the cable to
the ANT socket on the back of your TV.
2. Plug the TV into a mains socket and switch on at the
mains.
3. In standby mode, press the
button on the remote
control to turn the TV on. The LED indicator will flash
for a few seconds then the TV will switch on.
4. The first time you turn the TV on, it will go straight
into the First Time Installation menu. Please ensure
the aerial is plugged in.
Press the
buttons to highlight your language
then press OK.
First time installation
Welcome please select your language! English
Bienvenue ! Veuillez choisir une langue. Francais
Willkommen, Wahlen Sie bitte lhre Sprache aus! Deutsch
Benvenuti, Selezionate la vostra lingua! Italiano
Bienvenido, seleccione un idioma Espanol
Hos geldiniz, lutfen dil secimini yapiniz! Turkce
Dobrodosli, izberite vas jezik! Slovenski
Valkommen, valj ditt sprak! Svenska
Udvozoljuk, kerjuk valassza ki a nyelvet! Magyar
Bem-vendo, favor selectionar seu idioma Portugues
Tervetuloa, valitse kielesi! Suomi
Select Language Set Language
OK
If the TV is to be used in a store, please select the Store Mode. For domestic use,
Home Mode is recommended.
Store ModeHome Mode
SCART
SPDIF
VGA
ANT.
HDMI 1
HDMI 2
RF coaxial cable
(not included)
5. Press the buttons to select your country.
6. Press the
button to highlight Search Type, then
press the
buttons to select Digital Only. This will
only search for the digital channels.
7. Press the
button to highlight Teletext Language,
then press the
buttons to select your language.
The majority of people will want this set to West.
8. Press the
button to highlight Scan Encrypted (pay-
per-view) Channel, then press the
buttons to
select Yes or No.
9. Confirm these settings by pressing OK.
10. Press the
buttons to highlight Home Mode then
press OK.
First time installation
Welcome!
Country
Search Type
Teletext Language
Scan Encrypted Channels
UK
Digital only
West
Yes
< >
Select Language Start search
OK
Choose your country
OK
Please ensure your aerial is plugged in before tuning in your TV
Do not connect the TV to the mains supply until you have
completed all the connections.
• Always disconnect the TV from the mains socket when not in use for a long period of time.
• The
button on the remote control is only used for switching the TV into standby, it does not disconnect the TV from the
mains power. To completely disconnect the mains power, please remove the mains plug from the mains socket.
Chapter
3
To Next Page
Loading...
Need help?
General
