41
Customizing your TV
Optical Out
You can select the optical digital sound output as PCM or DOLBY DIGITAL when your TV is
connected to an amplifier that has a DOLBY DIGITAL decoder. If you select DOLBY DIGITAL,
you can enjoy listening to 5.1ch sound when watching digital broadcasts. This only applies to
digital channels.
Notes:
• If your amplifier does not have DOLBY DIGITAL decoder, select PCM. If you don’t
select PCM, it cannot output the sound from the speakers.
• For connecting an amplifier using the optical output, see page 49.
Manufactured under license from Dolby Laboratories. "Dolby", and
the double-D symbol are trademarks of Dolby Laboratories.
System Info
You can confirm the TV’s software version.
Front Panel Lock
This allows you to lock the buttons on the side of the TV. On / Off
Auto Demo
Auto Demo explains this TV’s features to you.
Notes:
• Please complete the Initial Setup menu first. The Auto Demo mode will start
automatically when the Initial Setup menu is completed.
• If you press any button on the television or remote, with the exception of
POWER or MENU, the Auto Demo mode will stop for 30 seconds. After 30 seconds
have passed with no operation, the Auto Demo mode will start again.
• If you want to turn off the Auto Demo, press the MENU button.
Transparency
Change the transparency of the menu screens. 1 / 2 / 3 / 4
Auto Shut Off
This function automatically shuts off your TV when there is no signal from the channel while the
TV is on for 10 minutes. On / Off
Setting (continued)
LCT2385-001A-A English 41LCT2385-001A-A English 41 4/14/08 3:43:22 PM4/14/08 3:43:22 PM
To Next Page
Loading...
Need help?
General
