19
INSTALL
Refer to “Using the TV’s menu” (see page 15) for details of
displaying the menu.
INSTALL
AUTO PROGRAM
MANUAL
PR LIST
:SELECT
OK:MOVE
AUTO PROGRAM
AUTO PROGRAM
You can automatically store the TV channels for which you
have the best reception. Store them in the TV’s program
numbers list by doing the following.
1 Choose AUTO PROGRAM. Then press the OK
button.
AUTO PROGRAM
START
OK:START
2 Press the OK button to start the AUTO
PROGRAM
AUTO PROGRAM
NOW PROGRAMMING
MENU:EXIT
The AUTO PROGRAM menu appears and received TV
channels are automatically stored in the program numbers.
• To cancel the AUTO PROGRAM function:
Press the MENU button.
PR LIST
01 -----
02 -----
03 -----
04 -----
05 -----
06 -----
07 -----
08 -----
09 -----
10 -----
11 -----
12 -----
13 -----
14 -----
15 -----
16 -----
17 -----
18 -----
19 -----
20 -----
21 -----
22 -----
23 -----
24 -----
25 -----
26 -----
27 -----
28 -----
29 -----
30 -----
图
NAME
INSERT
DELETE
After the TV channels have been registered in the
program numbers, the PR LIST menu appears.
• If you want, you can now edit the program numbers
using the AUTO PROGRAM function. For details, see
“To edit the PR LIST menu” on page 20.
MANUAL
You can store the TV channel for which you needed.
Store them in the TV’s program numbers list by setting the
following.
MANUAL
PROGRAM
BAND
CHANNEL
SEARCH
FINE TUNING
STORE
00
CH
02
:SELECT
:MOVE
1 Select PROGRAM and
choose the program number from 00 to 99.
2 Select BAND and press the / buttons to
choose the band type.
CH(AIR) / CC(CATV)
3 Select CHANNEL and
choose the channel number. (CH:02-69,CC:01-99)
4 Select SEARCH and
choose the serviceable TV channel.
5 If the channel reception is poor, select FINE
TUNING and
the program.
6 Select Store and
the manual setting.
When stored, OK will be displayed for short
seconds.
press the / buttons to
press the / buttons to
press the / buttons to
press the / buttons to fine tune
press the / buttons to store
To Next Page
Loading...
Need help?
General
