4
Buttons on the TV
2
. \ button
Increases/decreases the volume.In the menu system,these act like the right/left direction buttons on the
remote and adjust menu controls.
1. \ button
Scans up/down through the channel list. In the menu system, these act like the up/down direction buttons on the
remote and adjust menu controls.
/ button
Turn the TV on or switch it to standby. When the TV is on, short press it to confirm items; long press it to bring up
3.
Note: The location and names of the function buttons and power button on the TV may vary according to TV model.
the menu.
Base Installation
Important: The TV stand must be installed correctly before using the TV, unless the TV is wall-mounted. Incorrect
installation can result in damage or injury due to tip-over.
Note:
- Make sure the AC cord is not connected to the power outlet.
- Before starting assembly, make sure that you have a clean, safe and cushioned space to work in order to avoid
any damage to the TV.
- Do not touch or press the TV screen, the glass might break under pressure.
1. Carefully place the TV screen face-down on a clean, cushioned surface.
2. Insert and secure the stands with the screws provided as shown (2 screws on each side).
Screw size:
M5x30mm.
Note: Illustrations below are provided for reference only and may differ from actual product appearance.
To Next Page
Loading...
Need help?
General
