33
English
Using the Timer
kHz
MHz
CONT.
ALL PRGM
REC
S.MODE
SLEEP MONO
STCLOCK
RANDOM
A.BASS EX
TA NEWS INFO
EON
Timer indicator
Clock, timer-on time etc.
Unit (Front Panel)
Display
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
The timers let you control listening and recording functions automatically.
Use the Remote Control to set the clock and timers. The clock can be set whether the Unit is on or off.
The clock must be set before the timers can work.
Setting the Clock
On the Remote Control
1. Press and hold the SHIFT button until
the following procedure is finished.
2. Press the CLOCK button.
3. Press the SELECT (+) or (–) to set the
time.
4. Press the SET button.
5. Release the SHIFT button.
Remote Control
Steps
Explanation/Remarks
1. When CLOCK is pressed, the CLOCK indicator on
the display comes on and the clock time blinks.
2. The (+) button increases the time whereas the (–) but-
ton decreases the time. Pressing the button continuously
will change the time in 10 minute intervals.
3. When the time is Set, the time display changes from a
blinking display to a steady display. The clock starts
from 0 seconds.
1
2
3
4
5
Caution:
If a power failure occurs, the clock loses its setting.
The clock time is reset to "0:00". "CLOCK" on the
display starts blinking. The clock must be reset.
1
23
456
7
8
9
REC PAUSE
10
10
FM/AM
A
B
DISC
FM MODE
PLAY MODE
7£
DISC
DISC
– VOLUME +
SHIFT
SLEEP
ECHO
RM-SEV507TU
REMOTE CONTROL
AUX
C D
DECK
CLOCK TIMER
SET
– SELECT +
ON SCREEN
V.INTRO
HIGHLIGHT
SOUND
MODE
8
STILL
SELECT
RETURN
PREV NEXT
(8) SET
SHIFT
(2) TIMER
(1) CLOCK
(4 –) SELECT (5 +)
EN31-44;MX-V508T[U]/1 98.6.5, 9:57 AM33
To Next Page
Loading...
Need help?
General
