31
Recording from a Disc
Remote
ONLY
You can record tracks in digital recording from a CD onto
the USB device.
• Do not vibrate the System while recording tracks. It may
damage the recorded tracks.
Before recording....
• Connect a recordable USB device to the USB MEMORY
REC/PLAY (
) terminal. (See also page 10.)
• Turn on the TV and change the input of the TV to the
one the System is connected.
1 Select DVD/CD as the source.
2 Start recording.
• The System will automatically create the new group as
“JVC_A01.” If “JVC_A01” already exists or the number
of tracks recorded for one group is more than 99 tracks,
“JVC_A02,” “JVC_A03,” and so on will be created.
• You cannot change the source while recording.
• The tracks are recorded in the normal order even if
Program Play is activated.
• Some messages may appear on the display when
recording. For details about the messages on the display
for recording operations, see page 48.
• Playback sound may be interrupted when operating the
TV connected with the HDMI cable. However, recording
is not affected by the interruption.
To stop recording
manually:
To record the playing
track (1 track):
During play or pause...
EN_NX-T10[UG]_CS2.indb 31EN_NX-T10[UG]_CS2.indb 31 09.12.14 9:53:21 PM09.12.14 9:53:21 PM
To Next Page
Loading...
Need help?
General
