JVC PANDORA KD-X241 User Manual

ENGLISH
16
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
TROUBLESHOOTING
Symptom Remedy
General
Sound cannot be heard. • Adjust the volume to the optimum level.
• Check the cords and connections.
“MISWIRING CHECK
WIRING THEN PWR ON”
appears.
Turn the power off, then check to be sure the terminals of
the speaker wires are insulated properly. Turn the power
on again.
“PROTECTING SEND
SERVICE” appears.
Send the unit to the nearest service center.
Source cannot be selected.
Check the [SOURCE SELECT] setting. ( 4)
Radio
• Radio reception is poor.
• Static noise while
listening to the radio.
Connect the antenna firmly.
USB/iPod
Playback order is not as
intended.
The playback order is determined by the file name .
Elapsed playing time is not
correct.
This depends on the recording process earlier.
“NOT SUPPORT” appears
and file skips.
Check whether the file is a playable format. ( 14)
“READING” keeps flashing. • Do not use too many hierarchical levels and folders.
• Reattach the USB device.
“CANNOT PLAY” flashes
and/or connected device
cannot be detected.
• Check whether the connected device is compatible with
this unit and ensure the files are in supported formats.
( 14)
• Reattach the device.
The iPod/iPhone does not
turn on or does not work
• Check the connection between this unit and iPod/iPhone.
• Detach and reset the iPod/iPhone using hard reset.
Correct characters are not
displayed.
• This unit can only display uppercase letters, numbers,
and a limited number of symbols.
• Depending on the display language you have selected
( 5) , some characters may not be displayed correctly.
Symptom Remedy
ANDROID
• Sound cannot be heard
during playback.
• Sound output only from
the Android device.
• Reconnect the Android device.
• If in [AUDIO MODE] , launch any media player
application on the Android device and start playback.
• If in [AUDIO MODE] , relaunch the current media player
application or use another media player application.
• Restart the Android device.
• If this does not solve the problem, the connected Android
device is unable to route the audio signal to unit.
( 15)
Cannot playback at
[AUTO MODE] .
• Make sure JVC MUSIC PLAY APP is installed on the
Android device.
( 7)
• Reconnect the Android device and select the appropriate
control mode.
( 8)
• If this does not solve the problem, the connected Android
device does not support
[AUTO MODE] . ( 15)
“NO DEVICE” or “READING”
keeps flashing.
• Switch off the developer options on the Android device.
• Reconnect the Android device.
• If this does not solve the problem, the connected Android
device does not support
[AUTO MODE] . ( 15)
Playback is intermittent or
sound skips.
Turn off the power saving mode on the Android device.
“CANNOT PLAY”
• Make sure Android device contains playable audio files.
• Reconnect the Android device.
• Restart the Android device.
Pandora
“ADDERROR” New station creation is unsuccessful.
“CHKDEVICE”
Check the Pandora application on your device.
“NOSKIPS”
The skip limit has been reached.
“NOSTATIONS”
No stations are found.
“STATIONLMT”
The number of registered stations has reached its limit.
Retry after deleting unnecessary stations from your
device.
“UPGRADEAPP”
Make sure you have installed the latest version of the
Pandora application on your device.
JS_JVC_KD-X241_M_EN_1.indd 16JS_JVC_KD-X241_M_EN_1.indd 16 8/23/2016 11:30:40 AM8/23/2016 11:30:40 AM

JVC PANDORA KD-X241 Specifications

General

Brand	JVC
Model	PANDORA KD-X241
Category	Car Stereo System
Language	English