JVC PC-X110 User Manual

PC-X110 B/E/G/GI/EN
(eLock ADJUSTMENT
(Using the remote control)
Names of parts in the clock/time section, and their functions:
@ Timer mode indicator
@ SLEEP indicator
@ Timer indicator (ON/OFF)
@ Time display
© SLEEP button
(Press the following buttons while holding down the
SHIFT button)
@ Timer (©) button
@ CLOCK button
@ DOWN/UP button
@ TIMER ON/OFF (©) button
@ ENTER button
@ DISPLAY button
Use to display a current time.
Setting the current time
(when the PC-X110 is used first time)
(Example: to set the clock to PM 1:15)
SHIFT
a] =8 tr/ Ca a.
PS
SHIFT
®
72 22 Oo pn eis -
;
©
8
2
a
20 (No. 1904)
SHIFT button
@OnorF Q.
3 a 10
peek
free)
oO
CO
ielers
N14 ‘
> -Am feo
ZoIN
@ Connect the AC power cord; “AM 12:00” will blink in the
display.
Set the POWER button to on.
Press the CLOCK button while pressing the SHIFT
button; the hour's digits will blink.
Set to PM 1:00 by pressing the UP/DOWN buttons while
pressing the SHIFT button.
Press the ENTER button while pressing the SHIFT
button; the minute's digits will blink.
Set to PM 1:15 by pressing the UP/DOWN buttons while
pressing the SHIFT button.
Press the ENTER button while pressing the SHIFT
button; the time will light in the display.
©®® 648
Each time the hour's digits change from 11 to 12, the
display alternates between AM and PM. (12 midnightis
indicted as “AM 12:00” and 12 noonis indicated as “PM
12:00")
To set to the nearest second ...
Press the ENTER button while pressing the SHIFT
button when you hear the time signal from a TV or radio.
Notes:
®
Before
performing
timer
recording
or
playback,
it
is
necessary
to
set
the
current
time.
© Press the DISPLAY button while pressing the SHIFT
button to display the current time durning CD play, tape
play
or
radio
reception.
The
current
time
will
be
displayed
for 10 seconds after which the display returns to the
Previous mode.

JVC PC-X110 Specifications

General

Brand	JVC
Model	PC-X110
Category	CD Player
Language	English