15
To con rm the programmed tracks
While program playback is stopped, press UP
or DOWN repeatedly.
The tracks in the program will successively
appears on the display in the programmed order.
To add a track to the end of the program, •
press the number buttons to select the track
and then press SET.
To delete tracks in the program
While
program playback is
stopped, press
CANCEL.
Each time you press the button, the last track •
in the program is erased.
The program is cleared in the following •
situations:
- when the power is turned off
- when the disc compartment door is
opened
- when the USB device is disconnected
- when another source is selected
- when program mode is exited
To exit from the program playback
While stopped, press PLAY MODE.
The “PRGM” indicator goes off.
Random playback
You can play all the tracks, on the disc or USB
device in random order.
Press PLAY MODE to select “RANDOM”
during playback.
100:45
RANDOM
• During random playback, you cannot go
back to the previous track even by pressing
4/1 repeatedly.
To exit from the random mode
Press PLAY MODE during random playback.
The “RANDOM” indicator goes off.
Random playback is also canceled when you •
stop playback.
Repeat playback
You can repeat a track or tracks on the disc or
USB device as many times as you like.
Press REPEAT.
Each time you press the button, the play mode
changes as follows:
NOTE
• If pressed during random playback, random
playback is canceled.
For CD:
\ ALL \ canceled \ (back to the beginning)
• :
Repeats the current track.
• ALL:
Repeats all the tracks on the
disc.
For MP3/WMA files:
\ GROUP \ ALL \
canceled
\
(back to
the beginning)
• :
Repeats the current track.
• GROUP:
In normal play mode,
repeats all the tracks in a
group.
• ALL:
Repeats all the tracks on
the disc or USB device.
NOTE
• During program playback, only and ALL
can be selected.
RV-NB90J.indd15RV-NB90J.indd15 12.4.162:08:15PM12.4.162:08:15PM
To Next Page
Loading...
Need help?
General
