20
English
Available DSP Modes According to the Speaker Arrangement
Available DSP modes will vary depending on how many speakers are used with this receiver.
Make sure that you have set the speaker information correctly (see page 12).
Available DSP modes
Each time you press DSP MODE on the front panel or SURROUND MODE on
the remote control, the DSP modes change as follows:
Speaker arrangements
Front
speaker
TV
Front
speaker
• 3D THEATER
• LIVE CLUB
• DANCE CLUB
• HALL
• PAVILION
• HEAD PHONE
• 3D ACTION
• DSP OFF (DSP mode is canceled)
Notes:
• You can only select “HEAD PHONE” while playing a multi-sound source
encoded with Dolby Digital or DTS Digital Surround.
• You cannot select the Surround mode with this speaker setting.
Front
speaker
TV
Center speaker
Front
speaker
Each time you press DSP MODE on the front panel or SURROUND MODE on
the remote control, the DSP modes change as follows:
By pressing DSP MODE:
• THEATER
• LIVE CLUB
• DANCE CLUB
• HALL
• PAVILION
• HEAD PHONE
• 3D ACTION
• DSP OFF (DSP mode is canceled)
To activate the Surround
mode, press SURROUND
button so that the lamp next to
the button lights up.
To activate the Surround
mode, you can also use the
SURROUND button.
By pressing SURROUND MODE:
• DOLBY/DTS SURROUND
(DOLBY PRO LOGIC, DOLBY
DIGITAL, or DTS SURROUND)
• THEATER
• LIVE CLUB
• DANCE CLUB
• HALL
• PAVILION
• HEAD PHONE
• 3D ACTION
• DSP OFF (DSP mode is canceled)
Front
speaker
TV
Front
speaker
Rear
speaker
Rear
speaker
TV
Center speaker
Front
speaker
Front
speaker
Rear
speaker
Rear
speaker
EN18_25.RX-6000V[J] 99.12.16, 1:10 PM20
To Next Page
Loading...
Need help?
General
