JVC RX-7010VBK User Manual

26
Activating the DSP Modes
You can use only one DSP mode at a time. When a DSP mode is
activated, another DSP mode is canceled if in use.
For Dolby Pro Logic, Dolby Digital, and DTS
Digital Surround
1. Press SURROUND ON/OFF.
• Each time you press the button, the Dolby/DTS Surround turns
on and off alternately.
2. Select and play a sound source.
• To enjoy Dolby Pro Logic, play back a software encoded with
Dolby Surround and labeled with
DOLBY SURROUND
mark.
• To enjoy Dolby Digital, play back a software encoded with
Dolby Digital and labeled with
DIGITAL
mark.
• To enjoy DTS Digital Surround, play back a software encoded
with DTS Digital Surround and labeled with
mark.
To cancel the Dolby/DTS Surround mode
Press SURROUND ON/OFF again. (“SURROUND OFF” appears
on the display.)
For the other DSP modes
1. Press DSP MODE repeatedly until the mode
you want appears on the display.
• Each time you press the button, the DSP modes change. (See
page 22 for more details.)
2. Select and play a sound source.
• To enjoy JVC Theater Surround, play back a software encoded
with Dolby Surround and labeled with
DOLBY SURROUND
mark.
To cancel the DSP mode
Press DSP MODE repeatedly until “DSP OFF” appears on the
display.
On the remote control
On the front panel
SURROUND ON/OFF
ON/OFF
SURROUND
On the front panel
On the remote control
SURROUND ON/OFF
ON/OFF
SURROUND
DSP MODE
On the remote control
On the front panel
DSP
MODE
DSP MODE
On the remote control
On the front panel
DSP
MODE
EN20_27.RX-7010V[J]_f 00.12.6, 7:25 PM26

JVC RX-7010VBK Specifications

General

Brand	JVC
Model	RX-7010VBK
Category	Receiver
Language	English