17
Using External Equipments
Listening to External
Equipment
You can listen to external equipment such as MD recorder,
turntable or other auxiliary.
■ First make sure that the external equipment is properly
connected to the System. (See page 7).
1
Set the VOLUME control to the mini-
mum position.
2
Press the MD/AUX button.
“MD/AUX” appears on the display.
3
Start playing the external equipment.
4
Adjust the VOLUME control to the
desired listening level.
5
Apply sound effects, if you wish.
■ Press the BASS/TREBLE button on the Remote Control
to control the tone. (See “Tone Control” on page 10.)
To exit MD/AUX mode,
you will automatically switch
out of MD/AUX mode when you select another source.
• For operation of the external equipment, refer to its In-
structions.
Recording the System’s Source
to External Equipment
You can record the System’s source to external equipment
which is connected to the MD/AUX-IN/OUT or CD DIGI-
TAL OUT terminals of the System, such as cassette deck or
MD recorder, etc.
■ First make sure that the external equipment is properly
connected to the System. (See page 7).
1
Play the System’s CD Player or tune in
to a station.
■ The recording level is not affected by the VOLUME level
set by the System. Also it is not affected by the sound ef-
fects.
• For operation of the external equipment, refer to its In-
structions.
REMOTE CONTROL RM-SFSSD1000J
STANDBY/ON
DIMMER SLEEP
DISPLAY FM MODE
CD
PROGRAM
DOOR
SLIDE
AUTO
PRESET
REPEATRANDOM
BASS TREBLE CANCEL
UP
SET
DOWN
MD/AUX FM
/
AM
VOLUME
CD
FADE MUTING
PRESET
TUNING
CD
UPDOWN
CLOCK TIMER VOLUME
FM/AMMD/AUX
MULTI CONTROL
MD/AUX
MD/AUX
FS-SD5_E3.fm Page 17 Wednesday, February 14, 2001 2:02 PM
To Next Page
Loading...
Need help?
General
