16
Radio Data System Operations
Receiving FM Stations with Radio Data
System
Radio Data System allows FM stations to send additional
signals along with their regular program signals.
This System can receive the following types of Radio Data
System signals.
To show the Radio Data System information
While listening to an FM station...
* See page 15.
Searching for a Program by PTY Codes
You can locate a particular kind of program from the preset
stations (see page 8) by specifying the PTY codes.
• For details about PTY codes, see page 17.
To search for a program using the PTY codes
1 While listening to an FM station...
2 Select a PTY code.
3 Start searching.
The System scans 30 preset FM stations, stops when it
finds a station broadcasting the type of program you
selected, and tunes in to that station.
• When a program is found, “FOUND” appears on the
display and selected station is shown.
• If no program is found, “NOT FOUND” appears on the
display.
• To stop searching, press PTY SEARCH.
To continue searching after it stops on an unwanted
station
Press PTY SEARCH again.
PS (Program
Service)
Shows commonly known
station names.
PTY (Program
Type)
Shows types of broadcast
programs.
RT (Radio Text)
Shows text messages that the
station sends.
Enhanced Other
Networks
Provides information about the
types of programs broadcast by
the Radio Data System stations
of the different networks.
PS Station names are displayed. “NO PS” will
appear if no signal is sent.
PTY The broadcast program type is displayed. “NO
PTY” will appear if no signal is sent.
RT Text messages that the station sends are
displayed. “NO RT” will appear if no signal is
sent.
REPEAT
DISP/CHARA
PTY SEARCH
TA/News/Info
Remote control
Remote
ONLY
PS PTY
MEM REMAIN*
USB REMAIN*
RT
Frequency
(Non-Radio Data
System signal)
Clock
Remote
ONLY
Ex. When “News” is selected
UX-DM9[B].book Page 16 Friday, July 20, 2007 2:18 PM
To Next Page
Loading...
Need help?
General
