JVC UX-A3 User Manual

Tuner/Deck section
6000
VOLUME
- +
BASS | ACTIVE
HYPER — BASS
=. MIN MAX
©
“| = _
ob al
Not
Lm
->
= -=—
eer
=,
Display window
@ Band indicator (FM/AM (MW/LW))
@) Radio frequency display
@ MONDO indicator
(@) STEREO indicator
@) Preset station display
© Tape direction indicator (<4, >)
This indicator remains lit even in the CD and tuner
modes.
@ Tape mode display
(8) Recording indicator (REC)
DOLBY NR indicator (DOLBY NR)
TUNER/BAND button
* Press to select the tuner mode.
+ Press to select the band (FM/AM (MW/LW)).
FM MODE button
TUNING button (UP/DOWN)
Cassette holder
REVERSE MODE switch
= : For single-side recording or playback
“> _: For both-sides recording or playback
Cc.) : For continuous play
©©
UX-A3 B/E/G/GI/EN
DOLBY NR
o—_o2(=
|
DIRECTION switch
Press to change the direction of tape travel.
DOLBY NR button
Set to ON( +) when recording or playing back tapes
using the noise reduction system.
PHONES jack (3.5 mm dia. stereo mini plug)
Connect headphones (impedance 16 Q - 1 kQ) to this
jack. The speakers are automatically switched off when
headphones are connected.
Cassette operation buttons
© REC : Press this button with the PLAY
button to start recording.
PLAY : Press to play the tape.
~~ : Press to fast wind the tape from right to
left.
>> : Press to fast wind the tape from left to
right.
W/& STOP/EJECT: Press to stop the tape.
Pressing this button after the tape stops
opens the cassette holder.
Press to stop the tape temporarily. Press
again to release the pause mode.
BIPAUSE :
(No. 1850)
7

JVC UX-A3 Specifications

General

Brand	JVC
Model	UX-A3
Category	Stereo System
Language	English