JVC UX-C25BT Manual

Connection of USB devices
1. Press the button to select standby mode.
2. Connect the USB device to the USB port on the front side.
Removal of the USB device
1. Press the button to select standby mode.
2.RemovetheUSBdevicefromtheUSBport.
• Always wait until the device has completely read the CD/USB device before continuing.
• If no CD has been laid in the CD compartment, “NO DISC” will be displayed.
•IfthereisnoplayableaudioleintheUSBdevice,“NO SONG” will be displayed.
•Thereadingtimecanexceed10secondswithaudiolesifthereisagreatquantityofmusic
on a CD or USB device.
Playback of CD or audio files (USB, CD)
On the remote control: With the
Source
button, select the source and press the button to
begin playback.
On the main device: Using the
4. 5 mm
27 .0 m m
5. 8 mm
4. 3 mm
button, select the desired source and press the button to
begin playback.
InUSBdevicesorCDswhichcontainaudioles(e.g.MP3),thenumberoffolderspresentandthe
leswillbedisplayedasfollows:
Fxx XXX
Here the number behind “F”stands for the number of folders and the second block of numbers for
thetotalnumberofles.
For audio CDs, the information about the number of tracks and total play time will be displayed as
follows:
XX XX:XX
Heretherstblockofnumbersstandsforthenumberoftracksandthesecondforthetotalplaytime
of the CD.
Basic Operating Functions
Stopping Playback: Press the button on the main device or on the remote control to stop
playback.
Interrupting Playback: Press the
button on the main device or on the remote control to interrupt
playback.Thedisplayashesduringthis.Ifyoupressthebuttononemoretimetheplaybackcontinues.
Searching for a specific passages during playback: Keep the or button on the main
device or the remote control pressed down for longer than 2 seconds to activate fast rewind or fast
forward. As soon as the desired place is reached, release the relevant button again.
Selecting a specific track: Press the or button on the main device or on the remote control
in playback, paus or stop mode.
Jump by 10 tracks: Press the
+10
or
-10
button on the remote control in playback, paus or stop mode.
Selecting a specific folder (only with audio files): Press the
Fold+
or
Fold-
button on the remote
control to select a folder.
10

JVC UX-C25BT Specifications

General

Brand	JVC
Model	UX-C25BT
Category	Stereo System
Language	English