21
Timer Operations
Setting the Timer
Using Daily Timer, you can wake up with music, etc.
• You can store three Daily Timer settings; however, you can
activate only one of Daily Timers at the same time.
• To exit from the timer setting, press CLOCK/TIMER as
required.
• To correct a misentry during the process, press CANCEL.
You can return to the previous step.
1 Select one of the timer setting modes you want to set—
Daily 1 Timer, Daily 2 Timer, or Daily 3 Timer.
Remote control
CLOCK/
TIMER
SET/RESUME
CANCEL
PRESET UP,
PRESET DOWN
STANDBY/ON
How Daily Timer actually works
Once the Daily Timer has been set, the timer ( )
indicator and timer number indicator (1, 2, or 3) are lit on
the display. Daily Timer is activated at the same time
everyday until the timer is turned off manually or another
Daily Timer is activated.
When the on-time comes
The System turns on, tunes in to the selected station or
start playing the selected disc, and sets the volume level
to the preset level.
• If “P – – –” is selected, the last tuned station is selected.
• If “VOL – –” is selected, the last specified value is
selected.
• While Daily Timer is working, the timer ( ) and
timer number indicators (1, 2, or 3) flash on the display.
• The timer setting remains in memory until you change
it.
• Without canceling the Daily Timer, you can change the
source or adjust the volume after Daily Timer starts
playback.
Remote
ONLY
CLOCK
/TIMER
Ex.: When Daily Timer 1 setting mode is selected
Canceled
Clock setting
(see page 16)
Daily 1 Timer Daily 2 Timer Daily 3 Timer
To Next Page
Loading...
Need help?
General
