16
Setting the ECO (ecology) Mode
Setting the ECO mode allows you to reduce power
consumption by turning the display off while on standby.
While the System is on standby...
Changing the Color System and Scanning
Mode
INFO
Remote
ONLY
You can select the video output to match it to the color
system of your TV (NTSC or PAL).
• If you connect a progressive TV through the VIDEO
OUT (COMPONENT) jacks, you can enjoy a high
quality picture by selecting progressive scanning mode.
Before playback...
PAL/NTSC
Select for a conventional PAL or NTSC TV.
PAL PRG/
NTSC PRG
Select for a PAL or NTSC progressive TV.
• The PRGR (Progressive) indicator lights
on the display.
(while holding...)
Changing the Picture Tone
Remote
ONLY
While showing a playback picture on the TV, you can
select a preset picture tone, or adjust it and store your own
preference.
To select a preset picture tone
1 While playing, display VFP setting screen.
2 Select a preset picture tone.
NORMAL
Normally select this.
CINEMA
Suitable for a movie source.
USER1/USER2
You can adjust parameters and can
store the settings. (See page 17.)
To clear the screen, press VFP again while holding SHIFT.
(while holding...)
On the TV
EN09-18_UX-G500V[U]1.indd 16EN09-18_UX-G500V[U]1.indd 16 3/11/08 12:57:46 PM3/11/08 12:57:46 PM
To Next Page
Loading...
Need help?
General
