JVC UX-GD6M User Manual

(No.MB408)1-31
SECTION 4
ADJUSTMENT
4.1 Service mode
4.1.1 Confirming contents
(1) Tuner AM switch to 9kHz-step
(2) Tuner AM switch to 10kHz-step
(3) Cold start
(4) Tray lock
(5) DVD test mode
(6) DVD initialize
4.1.2 Confirming methods
1. Tuner AM switch to 9kHz-step
AM frequency change to 9kHz at U-version.
AM frequency is set to 9kHz-step.
Press the [ STANDBY/ON] button while pressing
the
[DOWN ] button on the main unit.
Press the [ STANDBY/ON] button on the
main unit and set the tuner in AM mode
.
Press the [ STANDBY/ON] button again on
the main unit to enter in standby mode
.
" AM 9KHZ "
FL indication
2. Tuner AM switch to 10kHz-step
AM frequency change to 10kHz at U-version.
AM frequency is set to 10kHz-step.
" AM 10KHZ "
FL indication
4. Tray lock
Loader-mecha is locked.
EJECT processing isn't done by pushing EJECT key
at tray lock on state.
Then display to LOCKED / UNLOCKED.
EJECT is pushed ,pushing STOP again ,tray lock is off.
Back up to tray locked ON/OFF.
Press the [ EJECT] button while pressing the
[STOP] button on the main unit in standby mode.
" LOCKED "
FL indication
Press the [ EJECT] button while pressing the [STOP]
button again on the main unit in standby mode.
" UNLOCKED "
FL indication
Press the [ STANDBY/ON] button while
pressing the
[ UP] button on the main unit.
Press the [ STANDBY/ON] button on the
main unit and set the tuner in AM mode
.
Press the [ STANDBY/ON] button again on
the main unit to enter in standby mode
.
3. Cold start
Cold start processing.
Press the [ STANDBY/ON ] key while pressing
the
[ENTER] and [10] keys on the remote controller
simultaneously
at standby.
" COLD "
FL indication
Cold start is completed.
Press the [ EJECT] button while pressing the [STOP]
button again on the main unit in standby mode.

JVC UX-GD6M Specifications

General

Brand	JVC
Model	UX-GD6M
Category	Stereo System
Language	English